Ratcheting and Barring, Gas Turbine power plant, Turbine engine start up
1.1 هزار بار بازدید -
5 ماه پیش
-
Hello Power Engineers Welcome to
Hello Power Engineers
Welcome to power plant guru for new video gas turbine ratcheting. This is a very important device and young engineers find it difficult to understand.
Ratcheting of gas turbine refers to slow rotation of the turbine shaft.
The rotation is carried out so as to avoid the sag of the rotor. By ratcheting, an unequal temperature profile along the rotor is prevented.
Ratcheting is administered by means of a ratchet motor, a jaw-clutch and the associated assembly comprising of limit switches. For a GE machine, ratcheting is done every three minutes. The turbine shaft is rotated by 45° in each cycle.
The basic idea is to prevent sagging of rotor and prevention of a bow formation that could otherwise pose a high vibration upon a subsequent start.
Welcome to power plant guru for new video gas turbine ratcheting. This is a very important device and young engineers find it difficult to understand.
Ratcheting of gas turbine refers to slow rotation of the turbine shaft.
The rotation is carried out so as to avoid the sag of the rotor. By ratcheting, an unequal temperature profile along the rotor is prevented.
Ratcheting is administered by means of a ratchet motor, a jaw-clutch and the associated assembly comprising of limit switches. For a GE machine, ratcheting is done every three minutes. The turbine shaft is rotated by 45° in each cycle.
The basic idea is to prevent sagging of rotor and prevention of a bow formation that could otherwise pose a high vibration upon a subsequent start.
5 ماه پیش
در تاریخ 1402/12/05 منتشر شده
است.
1,155
بـار بازدید شده