How to Test Fuel Pumps with a Scanner / Direct Injection Fuel Pressure Test using Autel Scanner

DIYAutoworksNG
DIYAutoworksNG
56.5 هزار بار بازدید - 3 سال پیش - I show how to test
I show how to test fuel pumps with a scanner using the direct injection fuel pressure test on the Autel scanner - MP808TS; an active scan tool. This test is done on the Honda Accord 2013 – 2017 with the GDI engine. If you're wondering how to test fuel pumps with a scan tool or how to test fuel pump without a gauge, or will scanner detect a bad fuel pump, or how to tell if you have a bad fuel pump, this video should help. Signs of bad fuel pump can look like other faults in the car. To test fuel pumps on direct injection engines  a bi-directional scanner such as the Autel MP808TS, is required because of the high pressure pump (secondary pump). A regular fuel pressure test is not feasible given the extremely high pressure on this second fuel pump. GDI engines have 2 fuel pumps. You can check if the Autel MaxiPro device supports this test on your car here - https://www.autel.com/vehicle-coverag...

Considering the Autel MaxiPRO MP808TS device? Buy on:  
  Amazon - https://amzn.to/3mddOH1  
  Aliexpress: https://s.click.aliexpress.com/e/_AAGO0F  
Get fuel pressure gauge from Amazon - https://amzn.to/3AYxVAl
I may earn a small commission from a purchase made through the link above. This does not increase the price you pay in any way, rather it helps support this small channel.  

Timestamps:
0:00 - Intro
0:23 - Fuel pumps GDI engines & signs of bad fuel pump
1:32 - Testing the fuel pump with scanner
3:46 - Results and wrap

#fuelpump #testfuelpump  #Autel #Piyke #DIYAutoWorksNG #autelscanner #obd2scanner #scantool #carscanner #diymechanic
3 سال پیش در تاریخ 1400/11/17 منتشر شده است.
56,585 بـار بازدید شده
... بیشتر