Resistance spot welding simulation in Simufact (First Example)
802 بار بازدید -
2 سال پیش
-
This video, explains how to
This video, explains how to use Simufact software to create a model for the spot welding process. Here, three plates are welded together then the temperature distribution around in the model is predicted. In addition, mechanical effects such as strain have been predicted in the model. This model was created by parameters from the experimental setup.
The video is short which is less than 15 minutes so you can quickly learn the basic parts of the software. In this video, we avoid giving too many details.
Here is the table of contents:
0:00 Intro
0:53 Preparing the components
3:57 Modeling the clamps
5:23 Settings for C-spot gun in sinufact
8:01 Solver settings
9:11 The simulation results
Please visit our website for more information:
www.Hyperlyceum.com
Or the following link:
https://hyperlyceum.com/product/resis...
If you need any help please send me an Email:
[email protected]
Licensed under creative commons Attribution-ShareAlike 4.0 International
https://creativecommons.org/licenses/...
Music promoted by https://www.chosic.com/free-music/all/
The video is short which is less than 15 minutes so you can quickly learn the basic parts of the software. In this video, we avoid giving too many details.
Here is the table of contents:
0:00 Intro
0:53 Preparing the components
3:57 Modeling the clamps
5:23 Settings for C-spot gun in sinufact
8:01 Solver settings
9:11 The simulation results
Please visit our website for more information:
www.Hyperlyceum.com
Or the following link:
https://hyperlyceum.com/product/resis...
If you need any help please send me an Email:
[email protected]
Licensed under creative commons Attribution-ShareAlike 4.0 International
https://creativecommons.org/licenses/...
Music promoted by https://www.chosic.com/free-music/all/
2 سال پیش
در تاریخ 1401/02/13 منتشر شده
است.
802
بـار بازدید شده