DIY Propane Forge / Foundry Furnace Burner - Build in 10 minutes - No Welding / Soldering Required

In the is video I guide you on how you can make your own forge / foundry furnace burner. Use precaution during your build as you will be dealing with open flames and powered tools.  

List of Materials Required
• Black Malleable Iron Reducing Tee - 3/4 in. x 3/4 in. x 1/2 in.
• Black Steel Nipple - 1/2 in. x 6 in.
• Black Malleable Iron Reducing Coupling - 1 in. x 1/2 in
• Mig Welding Contact Tip - 0.030 in.
• Hex Nipple Fitting - 1/8 in. MIP x 1/8 in. MIP
• Bushing Fitting - 1/4 in. MIP x 1/8 in. FIP
• Ball Valve - 1/4 in. FIP inlet & outlet
• Air Regulator with Gauge - 1/4 in. FIP inlet x 1/4 in. MIP outlet
• Adapter Union Fitting - 3/8 in Flare x 1/4 in MIP

Tools Used
• Cordless Drill
• Drill Bits
       • 5/32 in.  
       • 5/16 in.
• M6 x 1.0 Metric Tap
• 1/8 in. x 27 NPT Tap
• Tap Wrench
• Adjustable Wrench
• Various Wrenches
• Bench Vise

• #science_technology
• #sizzling_ingot
• #forge_burner
• #foundry_furnace_burner
• #burner
• #diy