SUPER SIMPLE PROPANE FORGE BURNER! - ELEMENTALMAKER

CLICK DESCRIPTION FOR PARTS LIST
Lets build a propane forge burner out of simple parts from the local big box store! This burner will be used in an upcoming video to melt a ton of aluminum cans, and to make Magnalium!

Parts list:

20PSI Propane Regulator - Here is the one I bought: http://amzn.to/2fsPgsn
Here's a cheap numbered drill bit set. I used a #53 but you may need to adjust slightly for your specific setup: https://amzn.to/2PqoN16
1/4" Ball Valve: https://amzn.to/2UgOdTI
3/8" FL x 1/4 MIP union (to adapt regulator output to 1/4"): https://amzn.to/2UfaxNx
1/4" Coupling: https://amzn.to/2UrxBJa
1 1/4" to 3/4" Reducer: https://amzn.to/3qk3gIu
1" to 3/4" reducer: https://amzn.to/3xE3EDP
8" section of 3/4" threaded pipe: https://amzn.to/3d38Mtz
1/4" x 2" nipple: https://amzn.to/3iYHE2D
1/4" square head plug: https://amzn.to/3qguI9L
Two 1/4" hose barbs: https://amzn.to/3xE3egJ
1/4" ID vinyl tubing (if you want to run your burner further away from your tank): https://amzn.to/3djxTZl

The above links are affiliate links which give the channel a small kickback to help fund projects.