Macintosh SE & SE/30 Analog Board Recapping Walkthrough
11.7 هزار بار بازدید -
5 سال پیش
-
Analog Board recapping walkthrough video
Analog Board recapping walkthrough video covers CRT discharge, flyback replacement and screen adjustments. Use Chrome to watch in 4K.
🔍 INDEX
0:00 Intro
2:48 Analog Board Revisions
5:33 4-pin Connector P1 (often burned)
6:12 Mouser Cart overview
8:19 Safety, CRT Discharge
11:14 Removing Analog Board
13:45 Recapping
39:14 Flyback Replacement
44:54 Silenx Fan
45:51 Reassembly
53:14 Testing & Adjustments
1:03:40 Closing Remarks
1:05:50 Why should you watch this entire video?
🛠 TOOLS:
• Plastic TV alignment tools: https://amzn.to/2Scykul
For making CRT adjustments on the white-covered side of the analog board. NEVER use metal! It must be ALL PLASTIC!
• Torx T15 with LONG neck: https://amzn.to/2ScAskx
• Bulldog Clip (helpful to pry off back case): https://amzn.to/2H7lIhF
• Phillips (+) head screw driver
• Discharge tool or flat-head screwdriver with a wire with alligator clips, for discharging the CRT -- ALWAYS done with the power off and power cord disconnected!
• Soldering iron with °F-only LCD & Solder Kit (80W, cheap!): https://amzn.to/36BYi0K
or
• Soldering Station (120W, ESD safe): https://amzn.to/30g1Frt
or
• HAKKO (Japanese) Soldering Station (70W ceramic core): https://amzn.to/2YvIo42
• Solder (Leaded Rosin Core 0.82mm): https://amzn.to/3GzJbVl
• Desoldering wick (Amazon US): https://amzn.to/3iMAnA5
💁♂️TIP: Set soldering iron temperature to 350°C. Don't use lead-free solder.
• 99% ISO Alcohol (Spray Bottle!): https://amzn.to/3ae4fG6
• 99% ISO Alcohol: https://amzn.to/3NoFkxN
• 99% ISO Alcohol: https://amzn.to/2YsK8v3
💁♂️3 alcohol choices because it's often out of stock.
• Voltmeter (Cheap!): https://amzn.to/2H1S7Ge
• Hot-Glue Gun & sticks: https://amzn.to/39hBfav
• Heat gun or very strong hair dryer that can melt hot glue, so you can remove some of the stock capacitors more easily after desoldering them -- some are hot-glued.
• Used toothbrush for scrubbing away the flux after you finish soldering in all your replacement capacitors. You can also use the opposite end of a toothbrush if you need to make adjustments on the Yoke as shown in my video.
• Swabs, for dipping in the alcohol if you need to clean up any spilled electrolyte from old, leaking capacitors.
• Rubber gloves (or any electrically insulated gloves) if you need to make adjustments around the CRT Yoke, especially with the power switched on.
🤓 USEFUL TOOL for Super-Geeks:
• DE-5000 Handheld LCR Meter (Amazon US): https://amzn.to/2ScttJz
The absolute best handheld meter to check the ESR of capacitors. That Amazon link comes with all 3 accessories: TL-21, TL-22 & TL-23. If you buy this to check your caps, feel free to post your ESR measurements of the Analog Board caps in the Comments section, and be sure to let me know which Frequency you used -- (e.g., 120Hz, 1kHz, etc.).
MENTIONED IN MY VIDEO:
• Capacitor List (Mouser Cart): https://bit.ly/37metyA
⚠️ If you choose your own capacitors, ensure the Lead Spacing matches the Analog Board holes. All other caps in my Mouser list sit flush with the board. Carefully consider the Height of your caps so you don't choose caps so tall they stick out and touch the CRT.
• Replacement connector pair for P1 is sold on Mouser:
15-31-1046: https://bit.ly/3blRW6M
19-09-1049: https://bit.ly/2w0DXTC
Gold Terminals: https://bit.ly/3GHLwgF
Standard Terminals: https://bit.ly/3oESSey
Product photo on Mouser is wrong but Description clarifies that there are "4 Positions." I bought the 2 connectors & gold terminals.
• SilenX IXP-34-16 60x25mm fan on Amazon US: https://amzn.to/2vGL3fT
• Mac Classic & SE Repair & Upgrade Secrets by Larry Pina: https://amzn.to/388LrC1
▶NOTE: You can freely access the Larry Pina book from Archive.org if you register, login & click the "Join waitlist" button here: https://bit.ly/2Ttq1ro
It works like a library book in that you can access it freely, but for a limited time. Special thanks to Karsten Kruse for having mentioned this.
💾 Lode Runner game: https://bit.ly/2HbVtsj
💵 NOTE: Your price on Amazon (US only) is the same even if you don't click the "amzn.to" Affiliate links above, but if you do click & purchase within 24 hours, Amazon may pay me a small commission on all qualifying items in your Cart (even items not linked above).
📕 TECHNICAL INFO:
• Analog Board Schematic: https://bit.ly/2YDryOt
• SE/30 Service Manual: https://bit.ly/2TweGLP
• Classic Mac Repair Notes: https://bit.ly/2J7NVsw
🗣️ 68kMLA Compact Mac Forum: https://bit.ly/2u06Mew
🗣️ Vintage Apple Macintosh Enthusiasts FB Group: https://bit.ly/2NTF5Ny
OTHER VIDEOS:
🍿 Recapping the DiiMO 50MHz 68030 PDS accelerator: Niobium Oxide RECAP of Macintosh PDS ...
🖥 27" iMac (2009-2011) Video Card Bake: Late 2009 iMac 27" Video Card Repair ...
🎬 For SE & SE/30:
• SONY PSU recapping: Macintosh SE/30 SONY Power Supply Rec...
• SEASONIC replacement PSU: Macintosh SE/30 New Power Supply (PSU...
💰SUPPORT MY WORK
https://www.paypal.me/supportJDW
📺 SUBSCRIBE:
http://www.youtube.com/c/JDW11/?sub_c...
#Apple #Macintosh #JDW
🔍 INDEX
0:00 Intro
2:48 Analog Board Revisions
5:33 4-pin Connector P1 (often burned)
6:12 Mouser Cart overview
8:19 Safety, CRT Discharge
11:14 Removing Analog Board
13:45 Recapping
39:14 Flyback Replacement
44:54 Silenx Fan
45:51 Reassembly
53:14 Testing & Adjustments
1:03:40 Closing Remarks
1:05:50 Why should you watch this entire video?
🛠 TOOLS:
• Plastic TV alignment tools: https://amzn.to/2Scykul
For making CRT adjustments on the white-covered side of the analog board. NEVER use metal! It must be ALL PLASTIC!
• Torx T15 with LONG neck: https://amzn.to/2ScAskx
• Bulldog Clip (helpful to pry off back case): https://amzn.to/2H7lIhF
• Phillips (+) head screw driver
• Discharge tool or flat-head screwdriver with a wire with alligator clips, for discharging the CRT -- ALWAYS done with the power off and power cord disconnected!
• Soldering iron with °F-only LCD & Solder Kit (80W, cheap!): https://amzn.to/36BYi0K
or
• Soldering Station (120W, ESD safe): https://amzn.to/30g1Frt
or
• HAKKO (Japanese) Soldering Station (70W ceramic core): https://amzn.to/2YvIo42
• Solder (Leaded Rosin Core 0.82mm): https://amzn.to/3GzJbVl
• Desoldering wick (Amazon US): https://amzn.to/3iMAnA5
💁♂️TIP: Set soldering iron temperature to 350°C. Don't use lead-free solder.
• 99% ISO Alcohol (Spray Bottle!): https://amzn.to/3ae4fG6
• 99% ISO Alcohol: https://amzn.to/3NoFkxN
• 99% ISO Alcohol: https://amzn.to/2YsK8v3
💁♂️3 alcohol choices because it's often out of stock.
• Voltmeter (Cheap!): https://amzn.to/2H1S7Ge
• Hot-Glue Gun & sticks: https://amzn.to/39hBfav
• Heat gun or very strong hair dryer that can melt hot glue, so you can remove some of the stock capacitors more easily after desoldering them -- some are hot-glued.
• Used toothbrush for scrubbing away the flux after you finish soldering in all your replacement capacitors. You can also use the opposite end of a toothbrush if you need to make adjustments on the Yoke as shown in my video.
• Swabs, for dipping in the alcohol if you need to clean up any spilled electrolyte from old, leaking capacitors.
• Rubber gloves (or any electrically insulated gloves) if you need to make adjustments around the CRT Yoke, especially with the power switched on.
🤓 USEFUL TOOL for Super-Geeks:
• DE-5000 Handheld LCR Meter (Amazon US): https://amzn.to/2ScttJz
The absolute best handheld meter to check the ESR of capacitors. That Amazon link comes with all 3 accessories: TL-21, TL-22 & TL-23. If you buy this to check your caps, feel free to post your ESR measurements of the Analog Board caps in the Comments section, and be sure to let me know which Frequency you used -- (e.g., 120Hz, 1kHz, etc.).
MENTIONED IN MY VIDEO:
• Capacitor List (Mouser Cart): https://bit.ly/37metyA
⚠️ If you choose your own capacitors, ensure the Lead Spacing matches the Analog Board holes. All other caps in my Mouser list sit flush with the board. Carefully consider the Height of your caps so you don't choose caps so tall they stick out and touch the CRT.
• Replacement connector pair for P1 is sold on Mouser:
15-31-1046: https://bit.ly/3blRW6M
19-09-1049: https://bit.ly/2w0DXTC
Gold Terminals: https://bit.ly/3GHLwgF
Standard Terminals: https://bit.ly/3oESSey
Product photo on Mouser is wrong but Description clarifies that there are "4 Positions." I bought the 2 connectors & gold terminals.
• SilenX IXP-34-16 60x25mm fan on Amazon US: https://amzn.to/2vGL3fT
• Mac Classic & SE Repair & Upgrade Secrets by Larry Pina: https://amzn.to/388LrC1
▶NOTE: You can freely access the Larry Pina book from Archive.org if you register, login & click the "Join waitlist" button here: https://bit.ly/2Ttq1ro
It works like a library book in that you can access it freely, but for a limited time. Special thanks to Karsten Kruse for having mentioned this.
💾 Lode Runner game: https://bit.ly/2HbVtsj
💵 NOTE: Your price on Amazon (US only) is the same even if you don't click the "amzn.to" Affiliate links above, but if you do click & purchase within 24 hours, Amazon may pay me a small commission on all qualifying items in your Cart (even items not linked above).
📕 TECHNICAL INFO:
• Analog Board Schematic: https://bit.ly/2YDryOt
• SE/30 Service Manual: https://bit.ly/2TweGLP
• Classic Mac Repair Notes: https://bit.ly/2J7NVsw
🗣️ 68kMLA Compact Mac Forum: https://bit.ly/2u06Mew
🗣️ Vintage Apple Macintosh Enthusiasts FB Group: https://bit.ly/2NTF5Ny
OTHER VIDEOS:
🍿 Recapping the DiiMO 50MHz 68030 PDS accelerator: Niobium Oxide RECAP of Macintosh PDS ...
🖥 27" iMac (2009-2011) Video Card Bake: Late 2009 iMac 27" Video Card Repair ...
🎬 For SE & SE/30:
• SONY PSU recapping: Macintosh SE/30 SONY Power Supply Rec...
• SEASONIC replacement PSU: Macintosh SE/30 New Power Supply (PSU...
💰SUPPORT MY WORK
https://www.paypal.me/supportJDW
📺 SUBSCRIBE:
http://www.youtube.com/c/JDW11/?sub_c...
#Apple #Macintosh #JDW
5 سال پیش
در تاریخ 1397/12/21 منتشر شده
است.
11,725
بـار بازدید شده