(#10) How To Wire A Painting (and Install Hardware)
80.9 هزار بار بازدید -
4 سال پیش
-
In this video, I’ll show
In this video, I’ll show you how I install the hardware and tie the picture hanging wire to prepare my paintings.
Here are the tools you will need:
** Screwdriver (for the type of screws included with your brackets or clips)
** Measuring Tape Or Ruler
** Pencil
** Wire Cutters and Pliers
Here is a list of the hardware I use:
** 1/8” Offset Hanging Clips (I refer to them as brackets in this video)
** The screws for the Hanging Clips
** 1.5mm picture hanging wire (vinyl coated or uncoated—I prefer the vinyl coated wire myself)
** 1.5mm Crimping Loop Sleeves
Check out my Instagram account for photos of my paintings:
www.instagram.com/toddalancrainartstudio/
Don’t forget to SUBSCRIBE and HIT THE NOTIFICATION BELL!!
Questions? Comments? Let me know in the comments below.
0:00 Start
0:04 Intro
0:13 Tools & hardware you'll need
0:27 Measuring down from the top of the canvas
0:53 The brackets (clips)
1:31 The vinyl coated wire
1:47 Measuring the wire
2:18 Knipex Combo Pliers
2:33 Crimping loop sleeves
3:20 HOW TO WIRE A PAINTING/PHOTO (Tying the knot)
6:31 Clipping off the excess wire
7:04 Tying knot on uncoated picture hanging wire
7:31 Nice & neat can't be beat!!
7:35 Closing
Thanks!!
4 سال پیش
در تاریخ 1399/07/07 منتشر شده
است.
80,923
بـار بازدید شده