How to desolder and read/write SPI flash memory with CH341 and NeoProgrammer (IoT flash, bios, etc)
9.9 هزار بار بازدید -
پارسال
-
Following guide will show you
Following guide will show you how to desolder SOIC/SSOP flash memory, connect it to CH341 programmer, flash or read it's content, and then solder it back in place. It can be used to dump IoT devices, to update computer bios and much more...
Our forum:
https://www.elektroda.com/
Our IoT teardowns list:
https://openbekeniot.github.io/webapp...
CH341 softwares:
https://github.com/YTEC-info/CH341A-S...
Submit a teardown and get free gift:
https://www.elektroda.com/rtvforum/to...
Our forum:
https://www.elektroda.com/
Our IoT teardowns list:
https://openbekeniot.github.io/webapp...
CH341 softwares:
https://github.com/YTEC-info/CH341A-S...
Submit a teardown and get free gift:
https://www.elektroda.com/rtvforum/to...
پارسال
در تاریخ 1402/01/13 منتشر شده
است.
9,992
بـار بازدید شده