Pressure Pot vs Vacuum Chamber | Resin Dice Casting
213.6 هزار بار بازدید -
5 سال پیش
-
In this video, I go
In this video, I go over the differences in Pressure Curing Resin for Dice Making, vs using a Vacuum chamber to remove the bubbles in your resin.
In essence, you can do EITHER, but the pressure pot works BETTER at getting you a consistent results with your dice making, with a lot less work on your end. Just put it in and forget it.
When curing with a pressure pot, the bubbles in your resin/silicone casting become so small, that they can't be seen by the human eye. When using a vacuum to remove the bubbles from the mold in your casting, you pull the bubbles WAY too far out of the mold, leaving you with not enough resin to finish your casting.
Now you CAN vacuum out the bubbles, and then pour it, but you run the risk of just adding bubbles at that stage anyway.
So really, my money is on getting a pressure pot over a vacuum chamber. It does two jobs, and I'm told that it can cure your silicone for your molds in the same way, but I have yet to try that myself. So take THAT part with a grain of salt.
Amazon Affiliate Link to the resin material that I used. Available in smaller batch sizes as needed: https://amzn.to/2KXlUkY
Amazon Affiliate Link to the mold material I used: https://amzn.to/2zccY5P
Amazon Affiliate Link to the Vacuum Chamber Kit: https://amzn.to/2PGwPU6
Harbor Freight Pressure Pot that I use/adapted for Resin Casting: https://www.harborfreight.com/2-1-2-h...
If you like twitter, I got one! Twitter: Rybonator1
I also have an Instagram! Instagram: dm_rybonator
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.
MUSIC:
"Renaissance Period" "Music For Youtu...
"Renaissance Period" "Music For Youtube Videos" "Royalty Free Music"
LAKEY INSPIRED - Better Days
LAKEY INSPIRED - Better Days
Resin Safety Data Sheet: https://cdn.shopify.com/s/files/1/121...
In essence, you can do EITHER, but the pressure pot works BETTER at getting you a consistent results with your dice making, with a lot less work on your end. Just put it in and forget it.
When curing with a pressure pot, the bubbles in your resin/silicone casting become so small, that they can't be seen by the human eye. When using a vacuum to remove the bubbles from the mold in your casting, you pull the bubbles WAY too far out of the mold, leaving you with not enough resin to finish your casting.
Now you CAN vacuum out the bubbles, and then pour it, but you run the risk of just adding bubbles at that stage anyway.
So really, my money is on getting a pressure pot over a vacuum chamber. It does two jobs, and I'm told that it can cure your silicone for your molds in the same way, but I have yet to try that myself. So take THAT part with a grain of salt.
Amazon Affiliate Link to the resin material that I used. Available in smaller batch sizes as needed: https://amzn.to/2KXlUkY
Amazon Affiliate Link to the mold material I used: https://amzn.to/2zccY5P
Amazon Affiliate Link to the Vacuum Chamber Kit: https://amzn.to/2PGwPU6
Harbor Freight Pressure Pot that I use/adapted for Resin Casting: https://www.harborfreight.com/2-1-2-h...
If you like twitter, I got one! Twitter: Rybonator1
I also have an Instagram! Instagram: dm_rybonator
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.
MUSIC:
"Renaissance Period" "Music For Youtu...
"Renaissance Period" "Music For Youtube Videos" "Royalty Free Music"
LAKEY INSPIRED - Better Days
LAKEY INSPIRED - Better Days
Resin Safety Data Sheet: https://cdn.shopify.com/s/files/1/121...
5 سال پیش
در تاریخ 1398/08/11 منتشر شده
است.
213,605
بـار بازدید شده