AutoCAD | Introduction to the AutoCAD Interface #autocad
99 بار بازدید -
3 هفته پیش
-
In this video, I've given
In this video, I've given the recap of the first tutorial in brief.
I've explained the coordinates button in the status bar. How to activate the coordinate button in AutoCAD?
Later I explained the use of model and layout spaces and how to use these spaces for drawing on a sheet.
How to activate Coordinates: This button displays the coordinate of the pointer as you draw.
How to activate Coordinates Grid Display (F7): Turns on the grids in the workspace.
How to activate Coordinates Snap Mode (F9): Makes the curser align with grid points.
How to activate Coordinates Orthomode (F8): If turned ON, horizontal and vertical lines can be drawn.
How to activate Coordinates Infer Constraints: If turned ON, this button creates constraints automatically.
How to activate Polar Tracking (F10): If turned ON then you can sketch lines at specific intervals.
How to activate Isometric Drafting: Used to switch between drawing planes.
How to activate Object Snap Tracking (F11): If ON you can select points using trace lines.
How to activate Line Weight: If turned ON then you can set the line weight otherwise the object will be shown with the default weight.
How to activate 3D Object Snap: Turned ON to select key points of a 3D object.
How to activate Dynamic UCS: When turned ON you can create the object on any face of UCS (3D object only).
How to activate Dynamic Input (F12): When turned ON an input box is attached to the curser.
How to activate Transparency: This button sets the transparency of an object.
How to activate Quick Properties: Shows some properties of a selected object.
How to activate Selection Cycling: When object are overlapped and selected then a list of selected objects is displayed.
How to activate Annotation Meter: If turned ON then the it tells annotations are attached to an object.
How to activate Model or Paper Space: Used to switch between model and paper space. Model is used to create drawings and paper is used to print drawings.
How to activate Annotation Scale: Used to control the size of annotative objects.
How to Annotation Visibility: Used too display the annotations that are not created in the current scale.
How to Annotation Visibility Auto scale: This button can change the scale of an object.
How to Annotation Visibility Workspace Switching: This button is used to switch between the workspaces.
How to Annotation Visibility Isolate Objects: Button used to hide or isolate object in drawing.
How to Annotation Visibility Clear Screen: Button used to hide ribbon and toolbars from the window. That provides more drawing area.
#autocad #autocadplan #autocadmechanical #autocad2024 #cad #cadcam #cadcammechanical #engineering #mechanical #science #egnineeringisfun #scienceexperiment #btech #btechprojects #bim
I've explained the coordinates button in the status bar. How to activate the coordinate button in AutoCAD?
Later I explained the use of model and layout spaces and how to use these spaces for drawing on a sheet.
How to activate Coordinates: This button displays the coordinate of the pointer as you draw.
How to activate Coordinates Grid Display (F7): Turns on the grids in the workspace.
How to activate Coordinates Snap Mode (F9): Makes the curser align with grid points.
How to activate Coordinates Orthomode (F8): If turned ON, horizontal and vertical lines can be drawn.
How to activate Coordinates Infer Constraints: If turned ON, this button creates constraints automatically.
How to activate Polar Tracking (F10): If turned ON then you can sketch lines at specific intervals.
How to activate Isometric Drafting: Used to switch between drawing planes.
How to activate Object Snap Tracking (F11): If ON you can select points using trace lines.
How to activate Line Weight: If turned ON then you can set the line weight otherwise the object will be shown with the default weight.
How to activate 3D Object Snap: Turned ON to select key points of a 3D object.
How to activate Dynamic UCS: When turned ON you can create the object on any face of UCS (3D object only).
How to activate Dynamic Input (F12): When turned ON an input box is attached to the curser.
How to activate Transparency: This button sets the transparency of an object.
How to activate Quick Properties: Shows some properties of a selected object.
How to activate Selection Cycling: When object are overlapped and selected then a list of selected objects is displayed.
How to activate Annotation Meter: If turned ON then the it tells annotations are attached to an object.
How to activate Model or Paper Space: Used to switch between model and paper space. Model is used to create drawings and paper is used to print drawings.
How to activate Annotation Scale: Used to control the size of annotative objects.
How to Annotation Visibility: Used too display the annotations that are not created in the current scale.
How to Annotation Visibility Auto scale: This button can change the scale of an object.
How to Annotation Visibility Workspace Switching: This button is used to switch between the workspaces.
How to Annotation Visibility Isolate Objects: Button used to hide or isolate object in drawing.
How to Annotation Visibility Clear Screen: Button used to hide ribbon and toolbars from the window. That provides more drawing area.
#autocad #autocadplan #autocadmechanical #autocad2024 #cad #cadcam #cadcammechanical #engineering #mechanical #science #egnineeringisfun #scienceexperiment #btech #btechprojects #bim
3 هفته پیش
در تاریخ 1403/04/13 منتشر شده
است.
99
بـار بازدید شده