How to make a Stopwatch With Arduino
5.9 هزار بار بازدید -
3 سال پیش
-
Make a stopwatch with Arduino
Make a stopwatch with Arduino Nano
This stopwatch performs three functions start, stop/pause and reset. It can count up to 23:59:59. The time is displayed on a 16x2 LCD screen. The three basic functions are performed by the three switches which are connected to the digital I/O pins of Nano
IMPORTANT LINKS:
Code- https://bit.ly/31SV2vn
LCD connections -https://bit.ly/31TQo0k
Timestamps:
0:00 Introduction
0:26 Circuit connections
1:41 Code
2:06 Final project
Social Media:
Instagram - Instagram: spottednemo
LinkedIn - LinkedIn: nimisha-chitriv-301073209
Code credits @ Tech with Zan
This stopwatch performs three functions start, stop/pause and reset. It can count up to 23:59:59. The time is displayed on a 16x2 LCD screen. The three basic functions are performed by the three switches which are connected to the digital I/O pins of Nano
IMPORTANT LINKS:
Code- https://bit.ly/31SV2vn
LCD connections -https://bit.ly/31TQo0k
Timestamps:
0:00 Introduction
0:26 Circuit connections
1:41 Code
2:06 Final project
Social Media:
Instagram - Instagram: spottednemo
LinkedIn - LinkedIn: nimisha-chitriv-301073209
Code credits @ Tech with Zan
3 سال پیش
در تاریخ 1400/01/18 منتشر شده
است.
5,914
بـار بازدید شده