How to fit a replacement / repair a meter box door
117.3 هزار بار بازدید -
10 سال پیش
-
MeterBoxesDirect.co.uk is an online retailer
MeterBoxesDirect.co.uk is an online retailer and manufacturer of meterboxes and spare parts with over 35 years experience.
This video is a brief guide on how to fit a replacement meter box door to an existing meter box. The box shown in the video is a recessed UK electrical meter box.
1. The first step is to remove the existing damaged meter box door by depressing the brass spring pin.
2. Secondly, fit the new Tricel door by holding it upright and placing the steel pin into the pre drilled hole at the bottom of the meter box.
3. Position the brass spring pin under the pre-drilled hole at the top of the box, releasing the spring pin allowing it to slot into place.
4. Finally, close the door as normal. This door features a slam shut lock (SSL) but is also available as a turn key lock (TKL)
To purchase any of our meterboxes, frames or spare parts please visit www.meterboxesdirect.co.uk
MeterBoxesDirect is a trading brand of Tricel (Gloucester) Ltd..
This film is provided for general information and background, it should not be relied upon as the sole information on how to complete a task.
Before commencing any DIY task please:
Assess the risks associated with what you are about to do -- taking any necessary precautions; and
Read and follow all manufacturer's instructions relating to the equipment, products or task you are about to use.
If you are in any doubt, please stop and seek advice from a professional. The tasks shown should not be attempted by the under 18s or the inexperienced. Some tasks such as work involving gas should only be carried out by qualified professionals.
To the extent permitted by law, Tricel (Gloucester) Ltd.. accepts no liability for any loss, damage or injury arising as a consequence of the advice contained in this film.
All references are correct at the time of filming.
This video is a brief guide on how to fit a replacement meter box door to an existing meter box. The box shown in the video is a recessed UK electrical meter box.
1. The first step is to remove the existing damaged meter box door by depressing the brass spring pin.
2. Secondly, fit the new Tricel door by holding it upright and placing the steel pin into the pre drilled hole at the bottom of the meter box.
3. Position the brass spring pin under the pre-drilled hole at the top of the box, releasing the spring pin allowing it to slot into place.
4. Finally, close the door as normal. This door features a slam shut lock (SSL) but is also available as a turn key lock (TKL)
To purchase any of our meterboxes, frames or spare parts please visit www.meterboxesdirect.co.uk
MeterBoxesDirect is a trading brand of Tricel (Gloucester) Ltd..
This film is provided for general information and background, it should not be relied upon as the sole information on how to complete a task.
Before commencing any DIY task please:
Assess the risks associated with what you are about to do -- taking any necessary precautions; and
Read and follow all manufacturer's instructions relating to the equipment, products or task you are about to use.
If you are in any doubt, please stop and seek advice from a professional. The tasks shown should not be attempted by the under 18s or the inexperienced. Some tasks such as work involving gas should only be carried out by qualified professionals.
To the extent permitted by law, Tricel (Gloucester) Ltd.. accepts no liability for any loss, damage or injury arising as a consequence of the advice contained in this film.
All references are correct at the time of filming.
10 سال پیش
در تاریخ 1392/12/29 منتشر شده
است.
117,383
بـار بازدید شده