[ENG SUB] 벤츠 G바겐 G63AMG 슈어x 썬팅 2편 "전면썬팅 50%로 해주세요."
57 هزار بار بازدید -
4 سال پیش
-
#MercedesBenz
#MercedesBenz #benz #Gwagen #tinting #car #windowtinting #sunting
'What's Up' by Glasstint
Today's Car: Mercedes-Benz G63 AMG (G Wagen)
SUV model that used to be a military car, was launched in 1979 for citizen and has been popular these days.
Installations is done.
You should always check from the side.
Still, it is the Tinters' ability to keep dust from entering this area.
One last tip for installation,
There is something I want to do with you guys.
What's Up Glasstint's New Contents,
Join us for 'What's Up, Tinters!'
Glasstint CEO, Choi Yun-seok visits the shop in person,
from one-point Lesson for installation to Sales and Marketing tips!
I can also give an opinion that is contrary to what they think.
Who can accommodate those opinions.
This is the first time that I am showing you the new G-Bargain installation, I will show you the windshield work as well.
This is a Shure X product, 50%,
This is one of the 5 concentrations of Shure X products: 6%, 12%, 20%, 35%, and 50%.,
This customer says that he prefers a suitable concentration to see the sheet inside or the appearance of a person,
rather than a dark film to protect privacy,
If there is no moisture, static electricity will introduce dust,
so when removing the back paper, it must be always watered.
As I've always said over and over again,
the Most Important factor when scraping is,
Instead of spraying the water and scraping it right away, you should first drain the water along with the dust.
You Have To scrape it with little dust, stone powder.
Secondly, the plastic squeegee should be used at an angle of about 30 degrees without using a glass scrubber, so that the scratch does not occur.
You Should feel if something 'Tick, Tick, Tick, Tick' is at your fingertips. Without feeling stuck by dirt can cause something big obstacles after installation.
Since the film of installation is determined by how well the cleaning finish is done, I will do the final cleaning and attach the film.
Take a good look at the movements of the left hand, how the left hand moves.
It's not about pushing perfectly, it's about pushing roughly so that the film spreads well.
And during the process, make sure there's no dust.
So during this process, you Have To check if there is dust or not,
Remove any dust and then squeeze it again.
The tinting muscle must be developed to apply power with
rapid agility.
So far, I've completed the installation of the G-Wagen windshield.
Please subscribe and click the like button. :)
'What's Up' by Glasstint
Today's Car: Mercedes-Benz G63 AMG (G Wagen)
SUV model that used to be a military car, was launched in 1979 for citizen and has been popular these days.
Installations is done.
You should always check from the side.
Still, it is the Tinters' ability to keep dust from entering this area.
One last tip for installation,
There is something I want to do with you guys.
What's Up Glasstint's New Contents,
Join us for 'What's Up, Tinters!'
Glasstint CEO, Choi Yun-seok visits the shop in person,
from one-point Lesson for installation to Sales and Marketing tips!
I can also give an opinion that is contrary to what they think.
Who can accommodate those opinions.
This is the first time that I am showing you the new G-Bargain installation, I will show you the windshield work as well.
This is a Shure X product, 50%,
This is one of the 5 concentrations of Shure X products: 6%, 12%, 20%, 35%, and 50%.,
This customer says that he prefers a suitable concentration to see the sheet inside or the appearance of a person,
rather than a dark film to protect privacy,
If there is no moisture, static electricity will introduce dust,
so when removing the back paper, it must be always watered.
As I've always said over and over again,
the Most Important factor when scraping is,
Instead of spraying the water and scraping it right away, you should first drain the water along with the dust.
You Have To scrape it with little dust, stone powder.
Secondly, the plastic squeegee should be used at an angle of about 30 degrees without using a glass scrubber, so that the scratch does not occur.
You Should feel if something 'Tick, Tick, Tick, Tick' is at your fingertips. Without feeling stuck by dirt can cause something big obstacles after installation.
Since the film of installation is determined by how well the cleaning finish is done, I will do the final cleaning and attach the film.
Take a good look at the movements of the left hand, how the left hand moves.
It's not about pushing perfectly, it's about pushing roughly so that the film spreads well.
And during the process, make sure there's no dust.
So during this process, you Have To check if there is dust or not,
Remove any dust and then squeeze it again.
The tinting muscle must be developed to apply power with
rapid agility.
So far, I've completed the installation of the G-Wagen windshield.
Please subscribe and click the like button. :)
4 سال پیش
در تاریخ 1399/06/19 منتشر شده
است.
57,081
بـار بازدید شده