JIC fittings, JIC hydraulic Fittings, jic fittings catalog, jic fitting drawing, parker jic fittings
697 بار بازدید -
4 سال پیش
-
https://www.jiayuanfitting.com/hydrau... you will find more jic fittings drawing and jic hydraulic fittings.
This video show JIC fittings type ( SAE 37° tube fittings, flared fittings, or SAE J514 fittings ) are the most popular hydraulic fluid connector in North America. While JIC fittings are often used for joining tubing in a hydraulic system, they are frequently used on hose as an end adapter for female JIC swivel fittings, which are the most common end connection for hydraulic hose assemblies.
meet the strict requirements of SAE J514 and ISO 8434-2 industry standards for 37° flare fittings. Its design is simple. It uses an easily produced flare at the tube end to seal and hold fluid under high pressure. The fitting consists of three pieces: the body, sleeve and nut. The tube is flared at a 37° angle (74° included angle) and held between the fitting nose (seat) and the sleeve (support) with the nut.
Tightening of the nut clamps the tube flare between the body nose (seat) producing a leak tight connection. This clamping on the 37° taper provides a measure of elasticity to the joint helping it to resist loosening under vibration. The clamping force results in a small radial load that tends to deform the fitting nose radially. The resistance of the nose to elastic deformation provides a constant preload (similar to a lockwasher) keeping it tight.
for more details send email to [email protected] . www.jiayuanfitting.com
This video show JIC fittings type ( SAE 37° tube fittings, flared fittings, or SAE J514 fittings ) are the most popular hydraulic fluid connector in North America. While JIC fittings are often used for joining tubing in a hydraulic system, they are frequently used on hose as an end adapter for female JIC swivel fittings, which are the most common end connection for hydraulic hose assemblies.
meet the strict requirements of SAE J514 and ISO 8434-2 industry standards for 37° flare fittings. Its design is simple. It uses an easily produced flare at the tube end to seal and hold fluid under high pressure. The fitting consists of three pieces: the body, sleeve and nut. The tube is flared at a 37° angle (74° included angle) and held between the fitting nose (seat) and the sleeve (support) with the nut.
Tightening of the nut clamps the tube flare between the body nose (seat) producing a leak tight connection. This clamping on the 37° taper provides a measure of elasticity to the joint helping it to resist loosening under vibration. The clamping force results in a small radial load that tends to deform the fitting nose radially. The resistance of the nose to elastic deformation provides a constant preload (similar to a lockwasher) keeping it tight.
for more details send email to [email protected] . www.jiayuanfitting.com
4 سال پیش
در تاریخ 1399/05/02 منتشر شده
است.
697
بـار بازدید شده