Mach 3 CNC lathe turning an Egg Shape In 6061 Aluminum
2.7 میلیون بار بازدید -
13 سال پیش
-
Turning an egg shape in
Turning an egg shape in some 6061 Aluminum using a Mach3 controlled lathe. The lathe is a converted Grizzly G4003 Lathe powered by Gecko Drives. I am Using a Groove/Turn Tool. The cutting is being done at a speed of 1000RPM, .035" D.O.C and at 5 IPM
Wow 100K views and rising. Thanks for watching!!!!!!!!!!!!!!!!!!!
Added Oct 6th 2012. Thanks to all for the comments...both good and bad. Since there seems to be quite a bit of confusion about the tool I am using I wanted to link to a couple videos that show people way smarter that me using a groove/turn used in a pretty similar way.
ISCAR Groove Turn -Actual Machining This is a video from Iscar.
Here is another but you need to skip to about 2:45 to see the groove turn tool in action. Thanks again for all of the interest! TurnLine.mp4
Link to another video with the same tool. Mach 3 Cnc lathe cutting a shape POV
Wow 100K views and rising. Thanks for watching!!!!!!!!!!!!!!!!!!!
Added Oct 6th 2012. Thanks to all for the comments...both good and bad. Since there seems to be quite a bit of confusion about the tool I am using I wanted to link to a couple videos that show people way smarter that me using a groove/turn used in a pretty similar way.
ISCAR Groove Turn -Actual Machining This is a video from Iscar.
Here is another but you need to skip to about 2:45 to see the groove turn tool in action. Thanks again for all of the interest! TurnLine.mp4
Link to another video with the same tool. Mach 3 Cnc lathe cutting a shape POV
13 سال پیش
در تاریخ 1391/02/07 منتشر شده
است.
2,714,346
بـار بازدید شده