Roland JV80 JV880 JV90 JV1000 Custom and 80's Vintage Soundbank (Now Available)

Roland JV80, JV1000, JV880, JV90, Custom Vintage Soundbank (Now Available) Update: No expansion board is required for these sounds. About 6 of the organ and choir sounds in this video that required the Pop EXP board have been replaced with excellent VintageSynth patches. There are still plenty of organ and choir patches in this bank. The Van Halen "Jump" patch that many have been interested in has been improved and is even more accurate. The old Jump patch still exists with a new name "Poly Saws 83". The new Jump patch is called "Jump OBXa". For those who purchased the previous file, I have sent out the new updated file called "JV80CustomVintage". No external effects or processing was used to create this demo. This patch bank is now available for 21.99 U.S, payable to [email protected] via PayPal. Be sure to send email address that you would like for me to send the FILE. This patch bank includes 64 custom and 80's type patches and 16 performance patches that can be written into your user internal memory. The file will be sent to your email as .syx. You will need a high-quality USB to midi cable such as the Roland UM1 MK2. It is available at Amazon. www.amazon.com/gp/product/B00... I cannot vouch for any other USB to midi cables, but from experience, the cheap cables have never worked for me when it comes to transferring bulk and .syx files back and forth. I used a free midi utility to create this file and to send it back into the JV80. I have double-checked to make sure that the file I am sending you works properly. Here is the free midi utility that I used. I did not have to make any adjustments other than select my midi cable device from the list for input and output. www.bome.com/products/sendsx Free midi utility System exclusive information can be used to store data such as Patch and Performance parameters. Use the following procedure to enable the JV-80/90/1000 to receive system exclusive data: 1) Press WRITE. 2) Use the CURSOR RIGHT button to select "PROTECT." 3) Press ENTER. 4) Use PARAMETER SLIDER 1 to change the "INTERNAL" memory protect value to "OFF." 5) Use PARAMETER SLIDER 2 to change the "EXCLUSIVE" memory protect value to "OFF." 6) Press EXIT twice. 7) Press MIDI. 8) Use the UP and DOWN ARROW buttons to select the "SYS-EX" display screen. 9) Use PARAMETER SLIDER 2 to select the appropriate Unit # (usually 17). 10) Send the information from your sequencer. When the sequencer is finished sending data, you will be able to access the new Patches, Performance parameters, etc. in the JV-80/90/1000. Thank you!

• #music
• #roland_jv80
• #roland_jv_80
• #roland_jv1000
• #roland_jv_1000
• #roland_jv80_patches
• #roland_jv80_sounds