DIY Desktop Fountain with Enchanting LED Crystals
871.1 هزار بار بازدید -
6 سال پیش
-
The first 100 people to
The first 100 people to click this link will get 2 months of Skillshare for free! http://skl.sh/nerdforge
Patreon: Patreon: nerdforge
I wanted to make something made of transparent filament that I could make glowing with LED lights, and so I decided to 3D print some crystals - but I couldn't just have those alone, which is why I ended up making this DIY indoor desktop fountain with a waterfall and overgrown by moss! I haven't done anything this similar to miniature landscaping before, but I had a lot of fun doing it!
3D MODELS USED:
- https://www.thingiverse.com/thing:61172
- https://www.thingiverse.com/thing:918581
- https://www.thingiverse.com/thing:159...
- https://www.thingiverse.com/thing:243...
PARTS USED:
- RGB LED-strip: https://bit.ly/2NEeI0J
- RGB wire: https://bit.ly/2x6QOka
- Heat shrink tube: https://bit.ly/2O6sdmG
- LED controller: https://bit.ly/2O8wANU
- Female power plug: https://bit.ly/2QnCpcb
- 12V power supply: https://bit.ly/2Mj59PR
- Vacuum pump: https://bit.ly/2COCB10
- Moss: https://bit.ly/2CJd2OY
- Exterior foam coat: http://bit.ly/foam-coat
- Plastic tubes
- Styrofoam
- Transparent, aquarium grade silicone
- Acrylic paint
- 3D printed crystals, transparent PLA
TOOLS:
- Creality CR-10 3D printer: https://bit.ly/2QjwZif
- Hot glue gun: https://bit.ly/2x0vNZ6
- Transparent filament: http://amzn.to/transparentfilament
- Soldering iron: https://bit.ly/2QimMm1
- Heat gun: https://bit.ly/2Nvs4wa
- Hot wire styrofoam slicer: How To Make The "Styro-Slicer" and http://bit.ly/hotwiretools
- Paintbrushes
- Acetone
FOLLOW:
Website - https://www.thenerdforge.com/
Facebook - Facebook: Nerdforge
Instagram - Instagram: thenerdforge
Twitter - Twitter: TheNerdforge
BUSINESS CONTACT: [email protected]
Patreon: Patreon: nerdforge
I wanted to make something made of transparent filament that I could make glowing with LED lights, and so I decided to 3D print some crystals - but I couldn't just have those alone, which is why I ended up making this DIY indoor desktop fountain with a waterfall and overgrown by moss! I haven't done anything this similar to miniature landscaping before, but I had a lot of fun doing it!
3D MODELS USED:
- https://www.thingiverse.com/thing:61172
- https://www.thingiverse.com/thing:918581
- https://www.thingiverse.com/thing:159...
- https://www.thingiverse.com/thing:243...
PARTS USED:
- RGB LED-strip: https://bit.ly/2NEeI0J
- RGB wire: https://bit.ly/2x6QOka
- Heat shrink tube: https://bit.ly/2O6sdmG
- LED controller: https://bit.ly/2O8wANU
- Female power plug: https://bit.ly/2QnCpcb
- 12V power supply: https://bit.ly/2Mj59PR
- Vacuum pump: https://bit.ly/2COCB10
- Moss: https://bit.ly/2CJd2OY
- Exterior foam coat: http://bit.ly/foam-coat
- Plastic tubes
- Styrofoam
- Transparent, aquarium grade silicone
- Acrylic paint
- 3D printed crystals, transparent PLA
TOOLS:
- Creality CR-10 3D printer: https://bit.ly/2QjwZif
- Hot glue gun: https://bit.ly/2x0vNZ6
- Transparent filament: http://amzn.to/transparentfilament
- Soldering iron: https://bit.ly/2QimMm1
- Heat gun: https://bit.ly/2Nvs4wa
- Hot wire styrofoam slicer: How To Make The "Styro-Slicer" and http://bit.ly/hotwiretools
- Paintbrushes
- Acetone
FOLLOW:
Website - https://www.thenerdforge.com/
Facebook - Facebook: Nerdforge
Instagram - Instagram: thenerdforge
Twitter - Twitter: TheNerdforge
BUSINESS CONTACT: [email protected]
6 سال پیش
در تاریخ 1397/03/18 منتشر شده
است.
871,137
بـار بازدید شده