EP 18 Onefinity CNC - Make Jigs With Your CNC

The CNC is an amazing machine all on its own, but it’s ever more powerful when used in conjunction with the other tools in your shop. In this video, Morgan makes a table saw sled, using the CNC to create positive stops for extremely accurate angled cuts. With just two locating pins (or dowels), you can set the angle and make crosscuts on the table saw with cnc-like accuracy. This is just one of the many ways you can use your cnc to get better results from the other tools in your shop. Make sleds for the bandsaw, custom squares with unique angles, fixtures for repetitive assembly processes, the sky’s the limit!

If you want to make this sled for yourself, the router bit, miter slot runner, and dovetail hardware can be found here…

Microjig 360 Sled Kit - https://www.microjig.com/products/360...

Dovetail Router Bit - https://www.microjig.com/products/dov...

‪@MorganHop‬ Cam Clamp Circle: https://creatoriq.cc/3PRYIYE

FREE cut files with pre-programmed toolpaths for both Carveco and Vectric are available for download on the Onefinity User Forum https://forum.onefinitycnc.com/t/ep-1...

https://www.onefinitycnc.com
https://forum.onefinitycnc.com

• #howto_style
• #cnc
• #onefinity
• #onefinity_cnc
• #onefinity_journeyman
• #onefinity_machinist
• #onefinity_woodworker
• #onefinity_x_50
• #onefinity_x_35
• #qcw
• #cnc_sled
• #woodworking_jig
• #cnc_machine
• #cnc_woodworking
• #cnc_router