Mini cnc machine / How to make G-code file from text and image / part 4

ALL File  :     http://www.mediafire.com/file/0e7twe4...
You need to decrease the voltage to 4.5 volts for the 2 amps , or use 5 volts 0.700 amps charger.
If it does not work with you, this means that you burned the motors

to upload the Circuit go to part 3

part 1 : https://goo.gl/GHZDtk
part 2 : https://goo.gl/bQWAEu
part 3 : Mini cnc machine / Prototype PCB / pa...
i am sorry about the video quality
If you have any question please feel free leave it in the description

FaceBook : https://bit.ly/2WSnrxw
instagram :  Instagram: hardwareboy0

parts :
3 DVD Driver
2 Screw 5 cm length   6 mm diameter
4 Screw 2.5 cm length   6 mm diameter
14 Nut  6 mm diameter
Aluminum Angle 2 cm      12 cm length
pvc pipe 10cm length    50mm diameter
servo  sg90
prototype pcb
2  l293d  ic
arduino nano
wires jumper
#cnc #cncprinter

• #science_technology
• #inkscape
• #gcode
• #g_code
• #how_to_make_gcode_file
• #text_to_gcode
• #image_to_gcode
• #cnc_machine
• #how_to