Tramming My Onefinity CNC | Problem with My Onefinity Journeyman X-50
6.9 هزار بار بازدید -
2 سال پیش
-
In the process of tramming
In the process of tramming my Onefinity Journeyman X-50 I discovered a slight problem with the design. To be clear its a minor problem and I still love the machine but it is a problem none the less and I think it has an easy solution. Use slightly bigger screws, easy fix...
00:00 Introduction
01:09 Shimming the z axis
01:43 The problem
02:49 The Fix
05:06 Finished
Screws I used to Fix the CNC https://amzn.to/3MF88my
Titebond Glue https://amzn.to/3COAyHm
Narex Chisels https://amzn.to/3euykU9
LED light strips https://amzn.to/3euykU9
¼ inch Router bit for inlay https://amzn.to/3RUEriq
⅛ inch compression bits https://amzn.to/3S5wZB3
00:00 Introduction
01:09 Shimming the z axis
01:43 The problem
02:49 The Fix
05:06 Finished
Screws I used to Fix the CNC https://amzn.to/3MF88my
Titebond Glue https://amzn.to/3COAyHm
Narex Chisels https://amzn.to/3euykU9
LED light strips https://amzn.to/3euykU9
¼ inch Router bit for inlay https://amzn.to/3RUEriq
⅛ inch compression bits https://amzn.to/3S5wZB3
2 سال پیش
در تاریخ 1401/07/26 منتشر شده
است.
6,944
بـار بازدید شده