Still In Action - International Harvester 1460 & CASE IH 1666 - Soybeans - Harvest 2021 Chasing
6.5 هزار بار بازدید -
3 سال پیش
-
Farmers were filmed on November
Farmers were filmed on November 4th in Washtenaw county, Michigan.
CASE IH 1666
The 16-4/6/8 series
Released in 1993, the 16 series was again upgraded to the 16-4/6/8 series. Models included the 1644, 1666 and 1688, and incorporated many changes to improve processing capacity.
https://open.alberta.ca/dataset/3c5ed...
Axial flow combines (also known as rotary harvesters) are a type of combine harvester that has been manufactured by International Harvester, and later Case International, Case Corporation and CNH Global, used by farmers to harvest a wide range of grains around the world.
Introduced in 1977, these harvesters marked a departure from traditional combine harvester design, in that threshing and separation was performed mainly by a rotor, as opposed to the drum and straw walker type models used previously. This is shown in the image at right, where the bulk of the processing area is devoted to a cylinder, that spins and threshes grain from the grain heads and allows for far greater capacity than the previous drum and walker design of harvester. This increase in capacity has led to a significant productivity increase of harvesters and therefore farmers who use them.
The rotary design by International Harvester was the first of its kind to be mass-produced and its patent over the design gave IH a competitive advantage over its rivals, including John Deere, Massey Ferguson, New Holland and others.
Case IH is a brand of agricultural equipment. It was created in 1985 when Tenneco bought selected assets of the agricultural division from International Harvester and merged it into its J.I. Case Company (IH itself then became Navistar.) Today Case IH is owned by CNH Industrial, which in turn is financially controlled by the Italian investment company Exor, which belongs to the Agnelli family.
Case IH offers agricultural equipment, financial services, as well as parts and service support for farmers and commercial operators through a network of dealers and distributors.
Productivity enhancing products include tractors; combines and harvesters; hay and forage equipment; tillage tools; planting and seeding systems; sprayers and applicators; and site-specific farming tools. Case IH has won many AE50 awards from the American Society of Agricultural and Biological Engineers, ASABE, for their products.
Some of Case IH's most famous equipment models include Axial-Flow combines, Magnum tractors, Steiger and Farmall.
Case IH history began when, in 1842, Jerome Case founded Racine Threshing Machine Works on the strength of his innovative thresher. In 1869 Case expanded into the steam engine business and, by 1886, Case was the world's largest manufacturer of steam engines. The company's founder died in 1891 at the age of 72. In 1892, Case was the first company to build a diesel-powered tractor.
In 1911, The J.I. Case Company had three cars in the first Indianapolis 500.
In 1967, Tenneco purchased J.I. Case, continuing to market the products under the Case name.
https://www.caseih.com/northamerica/e...
International 1460
https://www.ritchiespecs.com/model/in...
Axial flow combines (also known as rotary harvesters) are a type of combine harvester that has been manufactured by International Harvester, and later Case International, Case Corporation and CNH Global, used by farmers to harvest a wide range of grains around the world.
Introduced in 1977, these harvesters marked a departure from traditional combine harvester design, in that threshing and separation was performed mainly by a rotor, as opposed to the drum and straw walker type models used previously. This is shown in the image at right, where the bulk of the processing area is devoted to a cylinder, that spins and threshes grain from the grain heads and allows for far greater capacity than the previous drum and walker design of harvester. This increase in capacity has led to a significant productivity increase of harvesters and therefore farmers who use them.
The rotary design by International Harvester was the first of its kind to be mass-produced and its patent over the design gave IH a competitive advantage over its rivals, including John Deere, Massey Ferguson, New Holland and others.
International Harvester had launched the 15 series of conventional combine harvesters in 1968. In 1977, after extensive engineering efforts and a bottom up design, IH released the 1440 and 1460 models of harvester. In 1978, the larger model 1480 was released, as well as the specialty models 1470 (for hillside operation), and the 1482, designed to be pulled behind a tractor with PTO capability. Further models were introduced as the series was developed including the 1420 in 1980,
https://en.wikipedia.org/wiki/Case_IH...
Please like and share & thank you for watching.
#harvestchaser
#harvest2021
#GoPro
CASE IH 1666
The 16-4/6/8 series
Released in 1993, the 16 series was again upgraded to the 16-4/6/8 series. Models included the 1644, 1666 and 1688, and incorporated many changes to improve processing capacity.
https://open.alberta.ca/dataset/3c5ed...
Axial flow combines (also known as rotary harvesters) are a type of combine harvester that has been manufactured by International Harvester, and later Case International, Case Corporation and CNH Global, used by farmers to harvest a wide range of grains around the world.
Introduced in 1977, these harvesters marked a departure from traditional combine harvester design, in that threshing and separation was performed mainly by a rotor, as opposed to the drum and straw walker type models used previously. This is shown in the image at right, where the bulk of the processing area is devoted to a cylinder, that spins and threshes grain from the grain heads and allows for far greater capacity than the previous drum and walker design of harvester. This increase in capacity has led to a significant productivity increase of harvesters and therefore farmers who use them.
The rotary design by International Harvester was the first of its kind to be mass-produced and its patent over the design gave IH a competitive advantage over its rivals, including John Deere, Massey Ferguson, New Holland and others.
Case IH is a brand of agricultural equipment. It was created in 1985 when Tenneco bought selected assets of the agricultural division from International Harvester and merged it into its J.I. Case Company (IH itself then became Navistar.) Today Case IH is owned by CNH Industrial, which in turn is financially controlled by the Italian investment company Exor, which belongs to the Agnelli family.
Case IH offers agricultural equipment, financial services, as well as parts and service support for farmers and commercial operators through a network of dealers and distributors.
Productivity enhancing products include tractors; combines and harvesters; hay and forage equipment; tillage tools; planting and seeding systems; sprayers and applicators; and site-specific farming tools. Case IH has won many AE50 awards from the American Society of Agricultural and Biological Engineers, ASABE, for their products.
Some of Case IH's most famous equipment models include Axial-Flow combines, Magnum tractors, Steiger and Farmall.
Case IH history began when, in 1842, Jerome Case founded Racine Threshing Machine Works on the strength of his innovative thresher. In 1869 Case expanded into the steam engine business and, by 1886, Case was the world's largest manufacturer of steam engines. The company's founder died in 1891 at the age of 72. In 1892, Case was the first company to build a diesel-powered tractor.
In 1911, The J.I. Case Company had three cars in the first Indianapolis 500.
In 1967, Tenneco purchased J.I. Case, continuing to market the products under the Case name.
https://www.caseih.com/northamerica/e...
International 1460
https://www.ritchiespecs.com/model/in...
Axial flow combines (also known as rotary harvesters) are a type of combine harvester that has been manufactured by International Harvester, and later Case International, Case Corporation and CNH Global, used by farmers to harvest a wide range of grains around the world.
Introduced in 1977, these harvesters marked a departure from traditional combine harvester design, in that threshing and separation was performed mainly by a rotor, as opposed to the drum and straw walker type models used previously. This is shown in the image at right, where the bulk of the processing area is devoted to a cylinder, that spins and threshes grain from the grain heads and allows for far greater capacity than the previous drum and walker design of harvester. This increase in capacity has led to a significant productivity increase of harvesters and therefore farmers who use them.
The rotary design by International Harvester was the first of its kind to be mass-produced and its patent over the design gave IH a competitive advantage over its rivals, including John Deere, Massey Ferguson, New Holland and others.
International Harvester had launched the 15 series of conventional combine harvesters in 1968. In 1977, after extensive engineering efforts and a bottom up design, IH released the 1440 and 1460 models of harvester. In 1978, the larger model 1480 was released, as well as the specialty models 1470 (for hillside operation), and the 1482, designed to be pulled behind a tractor with PTO capability. Further models were introduced as the series was developed including the 1420 in 1980,
https://en.wikipedia.org/wiki/Case_IH...
Please like and share & thank you for watching.
#harvestchaser
#harvest2021
#GoPro
3 سال پیش
در تاریخ 1400/09/04 منتشر شده
است.
6,559
بـار بازدید شده