Easy AMAZING Custom Cosplay Visors CHEAP!

This is how I make my custom cosplay visors! Any questions? Leave a comment!

=x= SAFETY!! =x=
PETG can produce fumes that are harmful when it's heated to a high temperature. That being said, if you're vacuum forming only occasionally, and not going to an excessive high temperature, the fumes are minimal. When I vacuum form, I cannot smell fumes from the plastic. From what I understand, the fumes are minimal enough to not be hazardous to your health. I have confidence that this is a safe way to do occasional vacuum forming, as many members on the RPF report using this method for years.

I have heard people have success using large space heaters mounted on their side, or making a makeshift oven enclosure with heaters or heat guns to try to evenly heat the plastic. In my opinion, the immediate fire risk space heaters with bypassed safety features and makeshift ovens provide is much greater than the potential health risk of fumes being trapped in the oven.

Ideally, for regularly vacuum forming, a separate oven dedicated for vacuum forming would be used. In my case, the risk is so minimal that it does not justify the cost of a second oven.

Buy 0.03” PETG ($15.62 at recording date): https://www.ebay.ca/itm/281301697446

Buy iDye Poly ($5.59 at recording date): https://www.joann.com/jacquard-idye-n...
iDye Poly on ebay: https://www.ebay.ca/itm/255431988242

Buy Spray Chrome ($ 15.07 at recording date): https://www.ebay.ca/itm/362389544041?...

Helmet & Visor I made: https://www.thingiverse.com/thing:496...

#cosplay #diy