Ten layer vertical Kiss Pour cold process soap making tutorial. Slab mould (mold) Kiss Pour soap
31.2 هزار بار بازدید -
3 سال پیش
-
In this cold process soap
In this cold process soap making tutorial, I am making a kiss pour soap but I want to use the effect that the inside of the kiss pour has rather than the normal top view, so I'm making 10 layers of kiss pour soap and then cutting the bars as traditional bars to get the effect of all the layers in the side of the soap.
I am also trying out my wonderful new slab mould from Winston & Walter, here's their website:
winstonandwalter.ca/
This is my video on how to calculate the correct amount of oils for a soap mould:
• HOW TO MEASURE A SOAP MOLD (mould), F...
The main song is You set my world on fire - Loving Calibre Feat / Selestine
I hope you enjoy the video. I'd love it if you would give me a thumbs up, subscribe to my channel, and ring the notification bell. This helps me to grow my channel. If you have any comments or questions please leave them in the comment section below and I will get back to you.
Links:
My Website, buy my soaps here - www.idreaminsoap.co.uk/
My Instagram page - www.instagram.com/idreaminsoap
I try to give lots of hints and tips in all of my videos, so hopefully, you can use some of the techniques in this cold process soap-making tutorial in your own soap making. Discount on Lye (sodium hydroxide) and rubbing alcohol
Are you a soapmaker in the UK? for great value lye (sodium hydroxide), rubbing alcohol and more try JennyChem, they are one of the cheapest suppliers in the UK, I use their lye in all of my soap. You can even get 5% off any order if you use my special discount code LISA7152 - go to Jennychem at - www.jennychem.com/
Disclaimer
Although my cold process soap making tutorials are of a tutorial nature, they are intended for people who have a good understanding of making cold process soap. The information given is based on what works for me, however, there are lots of variables associated with cold process soap making and I therefore, take no responsibility for the results achieved when using the techniques or methods explained in these tutorials. Cold process soap involves the necessary use of sodium Hydroxide (lye) which is a very dangerous substance. Before attempting and cold process soap making you should ensure you are fully aware of the lye safety procedures and always wear the correct safety equipment when making soap.
#soapmaking #coldprocessoap
3 سال پیش
در تاریخ 1400/04/25 منتشر شده
است.
31,208
بـار بازدید شده