Round Pedestal Trestle Table Build - Full Tutorial with Free Dimensions (included in description)
4.5 هزار بار بازدید -
3 سال پیش
-
In this video I show
In this video I show how I built this round dining table using only pine framing lumber!
This circular pedestal table was a fun build, cutting perfectly round tables with my router is one of my favorite things to do! Check out the video!
Other related videos:
Round table top cutting video: How to make a perfectly round table t...
Adjustable levelers video: How to Fix Table Wobble Using Adjusta...
Starbond video: Using Starbond CA Glue to Fill Cracks...
Final dimensions: 54" (diameter) x 30" (height)
Materials/lumber:
2x6x8 (x7)
2x8x8 (x4) - I would get an extra or replace 2 of them with 2x8x10s
Poplar or any kind of 1/2" dowel rod
Products/tools used: (amazon affiliate)
Dewalt circular saw: https://amzn.to/3qqYsiG
Dewalt drills: https://amzn.to/2O1O6ZI
Dewalt miter saw: https://amzn.to/3y6Tn2Q
Dewalt router: https://amzn.to/3r6eZcI
Clear Style Adjustable Furniture Levelers: https://amzn.to/3g9aGtj
Z clip fasteners: https://amzn.to/3iTyFOa
Starbond variety pack: https://amzn.to/3u4JNNM
Freud forstner bit set: https://amzn.to/31nrYfi
Freud 9/16” slot cutter router bit: https://amzn.to/3sRxWRa
Festool track saw: https://amzn.to/3jKTcVC
Festool Rotex 150 FEQ Sander: https://amzn.to/3m67HVf
Festool Router: https://amzn.to/31JJpXI
Festool CTA 48 Dust Extractor: https://amzn.to/2S43gjb
SawStop 3HP PCS: https://amzn.to/3kk7Pk1
Pony pipe clamps: https://amzn.to/3jiYsQ6
Speed square: https://amzn.to/3oJryJj
Jorgensen clamps: https://amzn.to/3j3FEnO
Jorgensen 6” clamps: https://amzn.to/3dLkEB0
Irwin 24” clamps: https://amzn.to/2NpFRWv
Irwin 36” clamps: https://amzn.to/37NN2za
Irwin 48” clamps: https://amzn.to/2Yodiem
Irwin pull saw: https://amzn.to/3tNRczW
Irwin Chisels: https://amzn.to/3bCbq88
Kobalt Bench Plane: https://amzn.to/32J4thc
SKIL 30 piece router bit set: https://amzn.to/3sPIKiK
Whiteside spiral up cut router bit: https://amzn.to/3lRim5W
Nitrile gloves: https://amzn.to/2UAa3Ca
Breath buddy mask: https://amzn.to/3hsJreD
3M hearing protection: https://amzn.to/2X9FgO5
Bolle ski goggles (safety glasses) https://amzn.to/3z9cKca
GoPro Hero 8 Black: https://amzn.to/3idfFvh
Camera tripod: https://amzn.to/3tyjgrV
Dimenison/Cut list:
Everything is surfaced and edge planed to appx 5.4" (wide), and 1.4" (thich). All dimensions are approximate.
Middle post: Crosscut to ~25" long (x3), rip as shown in the video. Final crosscut to 22.5"
Support beams: Crosscut to ~50" (x1) and ~22.5" (x2). Crosscut to 48" final after they're glued together.
Diagonal supports: ~22ish" long (x8) - measure them as seen in the video.
Top: crosscut the 2x8s to ~54" (x2), 52" (x2), 46" (x2) and 44" (x2). I would recommend replacing 2 of the 2x8x8s to 2x8x10s. You can cut the 52/44" board at a 45 degree angle to stretch the board along the circumference, but it's REALLY REALLY close to not being long enough.
This was filmed with a GoPro Hero 8 Black and edited in iMovie.
Thanks for watching! Be sure to subscribe and check out some of my other videos! Find me on Instagram (MMCC_Woodshop) for more of my work!
*DISCLAIMER* The following content is for entertainment purposes only. Woodworking and using power tools can be extremely dangerous if not done properly. YOU (the viewer) are fully responsible for understanding proper use of tools, as well as the safety features of each. I highly suggest reading the owners manual and/or watching how-to videos on the tools. I (MMCC_Woodshop) am not responsible nor liable for any injury, death, or handing of the tools you may use, nor do I assume to display the proper handing of as a demonstration. Please use extreme caution when working with any power tools. - Matt
Want to support my channel? Feel free to buy me a coffee!https://www.buymeacoffee.com/mmccwoodsh7
This circular pedestal table was a fun build, cutting perfectly round tables with my router is one of my favorite things to do! Check out the video!
Other related videos:
Round table top cutting video: How to make a perfectly round table t...
Adjustable levelers video: How to Fix Table Wobble Using Adjusta...
Starbond video: Using Starbond CA Glue to Fill Cracks...
Final dimensions: 54" (diameter) x 30" (height)
Materials/lumber:
2x6x8 (x7)
2x8x8 (x4) - I would get an extra or replace 2 of them with 2x8x10s
Poplar or any kind of 1/2" dowel rod
Products/tools used: (amazon affiliate)
Dewalt circular saw: https://amzn.to/3qqYsiG
Dewalt drills: https://amzn.to/2O1O6ZI
Dewalt miter saw: https://amzn.to/3y6Tn2Q
Dewalt router: https://amzn.to/3r6eZcI
Clear Style Adjustable Furniture Levelers: https://amzn.to/3g9aGtj
Z clip fasteners: https://amzn.to/3iTyFOa
Starbond variety pack: https://amzn.to/3u4JNNM
Freud forstner bit set: https://amzn.to/31nrYfi
Freud 9/16” slot cutter router bit: https://amzn.to/3sRxWRa
Festool track saw: https://amzn.to/3jKTcVC
Festool Rotex 150 FEQ Sander: https://amzn.to/3m67HVf
Festool Router: https://amzn.to/31JJpXI
Festool CTA 48 Dust Extractor: https://amzn.to/2S43gjb
SawStop 3HP PCS: https://amzn.to/3kk7Pk1
Pony pipe clamps: https://amzn.to/3jiYsQ6
Speed square: https://amzn.to/3oJryJj
Jorgensen clamps: https://amzn.to/3j3FEnO
Jorgensen 6” clamps: https://amzn.to/3dLkEB0
Irwin 24” clamps: https://amzn.to/2NpFRWv
Irwin 36” clamps: https://amzn.to/37NN2za
Irwin 48” clamps: https://amzn.to/2Yodiem
Irwin pull saw: https://amzn.to/3tNRczW
Irwin Chisels: https://amzn.to/3bCbq88
Kobalt Bench Plane: https://amzn.to/32J4thc
SKIL 30 piece router bit set: https://amzn.to/3sPIKiK
Whiteside spiral up cut router bit: https://amzn.to/3lRim5W
Nitrile gloves: https://amzn.to/2UAa3Ca
Breath buddy mask: https://amzn.to/3hsJreD
3M hearing protection: https://amzn.to/2X9FgO5
Bolle ski goggles (safety glasses) https://amzn.to/3z9cKca
GoPro Hero 8 Black: https://amzn.to/3idfFvh
Camera tripod: https://amzn.to/3tyjgrV
Dimenison/Cut list:
Everything is surfaced and edge planed to appx 5.4" (wide), and 1.4" (thich). All dimensions are approximate.
Middle post: Crosscut to ~25" long (x3), rip as shown in the video. Final crosscut to 22.5"
Support beams: Crosscut to ~50" (x1) and ~22.5" (x2). Crosscut to 48" final after they're glued together.
Diagonal supports: ~22ish" long (x8) - measure them as seen in the video.
Top: crosscut the 2x8s to ~54" (x2), 52" (x2), 46" (x2) and 44" (x2). I would recommend replacing 2 of the 2x8x8s to 2x8x10s. You can cut the 52/44" board at a 45 degree angle to stretch the board along the circumference, but it's REALLY REALLY close to not being long enough.
This was filmed with a GoPro Hero 8 Black and edited in iMovie.
Thanks for watching! Be sure to subscribe and check out some of my other videos! Find me on Instagram (MMCC_Woodshop) for more of my work!
*DISCLAIMER* The following content is for entertainment purposes only. Woodworking and using power tools can be extremely dangerous if not done properly. YOU (the viewer) are fully responsible for understanding proper use of tools, as well as the safety features of each. I highly suggest reading the owners manual and/or watching how-to videos on the tools. I (MMCC_Woodshop) am not responsible nor liable for any injury, death, or handing of the tools you may use, nor do I assume to display the proper handing of as a demonstration. Please use extreme caution when working with any power tools. - Matt
Want to support my channel? Feel free to buy me a coffee!https://www.buymeacoffee.com/mmccwoodsh7
3 سال پیش
در تاریخ 1400/09/28 منتشر شده
است.
4,540
بـار بازدید شده