FTM400 Series #2, Wires-X & FT2D or FT3D Setup
1.7 هزار بار بازدید -
3 سال پیش
-
This video is for setting
This video is for setting up an Yaesu FT2D or FT3 for Wires-X connection to our repeater that uses a TX DG-ID 02 vs DG-ID 00.
The FT2d & FT3D use the same settings so this video applies to both models.
The Wires-X is not located at the repeater site, it is located at an EOC.
No internet is required at the repeater site.
73, VE7RYF
The FT2d & FT3D use the same settings so this video applies to both models.
The Wires-X is not located at the repeater site, it is located at an EOC.
No internet is required at the repeater site.
73, VE7RYF
3 سال پیش
در تاریخ 1400/11/09 منتشر شده
است.
1,799
بـار بازدید شده