How to Install a Two-Piece Toilet by American Standard for Retail
125.6 هزار بار بازدید -
4 سال پیش
-
Installing a two piece toilet
Installing a two piece toilet quick and easy. Follow these step-by-step instructions and you'll have your new American Standard toilet up and running in no time.
Tools: chisel, adjustable wrench, Philips head screwdriver, painters tape/rag
0:00Un-installing
0:48 Step 1: Shut off water supply. Then empty tank and toilet of water.
1:48 Step 2: Disconnect water line and loosen nuts and bolts on both sides, allowing you to remove the tank.
2:10 Step 3: After removing the tank, loosen nuts and bolts from the base. Then pull the base out, and plug the hole so nothing comes in or out.
2:50 Step 4: Slide and pull T-bolts out. Then use your chisel to cleanly take the old wax ring off.
Installing the base-
3:30 Step 5: Insert new T-bolts and firmly press the new wax ring onto the base of the toilet.
4:26 Step 6: Take the rag out and carefully drop the base down with the T-bolts coming through the holes on each side.
5:00 Step 7: Press the base down so the wax ring seals, and hand tighten the provided nuts onto the T-bolts. Use the caps to cover the nuts and bolts.
Installing the tank
5:30 Step 8: Connect the provided gasket to the tank and place the tank on top of the base. Tighten each side while alternating from each side to keep the tank balanced.
6:45 Step 9: Connect the supply line and turn on the water. Place the top of the tank on.
7:15 Step 10: Install the toilet seat and you are done!
If you love the product as much as us leave a review!
Subscribe to our Channel:
http://www.bit.ly/AmericanStandardSub...
American Standard on Facebook: Facebook: AmericanStandardPlumbing
American Standard on Twitter:
Twitter: AMStandard
American Standard on Instagram: Instagram: american_standard
American Standard on Pinterest: Pinterest: amstandard
Find More Great Videos from American Standard: americanstandard01
Check out our Luxury Bathroom Products at DXV
dxvluxury
Tools: chisel, adjustable wrench, Philips head screwdriver, painters tape/rag
0:00
0:48 Step 1: Shut off water supply. Then empty tank and toilet of water.
1:48 Step 2: Disconnect water line and loosen nuts and bolts on both sides, allowing you to remove the tank.
2:10 Step 3: After removing the tank, loosen nuts and bolts from the base. Then pull the base out, and plug the hole so nothing comes in or out.
2:50 Step 4: Slide and pull T-bolts out. Then use your chisel to cleanly take the old wax ring off.
Installing the base-
3:30 Step 5: Insert new T-bolts and firmly press the new wax ring onto the base of the toilet.
4:26 Step 6: Take the rag out and carefully drop the base down with the T-bolts coming through the holes on each side.
5:00 Step 7: Press the base down so the wax ring seals, and hand tighten the provided nuts onto the T-bolts. Use the caps to cover the nuts and bolts.
5:30 Step 8: Connect the provided gasket to the tank and place the tank on top of the base. Tighten each side while alternating from each side to keep the tank balanced.
6:45 Step 9: Connect the supply line and turn on the water. Place the top of the tank on.
7:15 Step 10: Install the toilet seat and you are done!
If you love the product as much as us leave a review!
Subscribe to our Channel:
http://www.bit.ly/AmericanStandardSub...
American Standard on Facebook: Facebook: AmericanStandardPlumbing
American Standard on Twitter:
Twitter: AMStandard
American Standard on Instagram: Instagram: american_standard
American Standard on Pinterest: Pinterest: amstandard
Find More Great Videos from American Standard: americanstandard01
Check out our Luxury Bathroom Products at DXV
dxvluxury
4 سال پیش
در تاریخ 1399/03/29 منتشر شده
است.
125,690
بـار بازدید شده