Nokia Lumia 800 Screen Repair / Replace / Change a Broken LCD (AMOLED) + Touch Screen (Digitizer)
922.1 هزار بار بازدید -
13 سال پیش
-
For spares try
For spares try http://www.etradesupply.com/nokia/nok... which also gives me credit.
Glass Screen Only Lumia 800/900/N9 Glass Screen Only
Proximity Sensor Removal Nokia Lumia 800 & N9 Screen Frame Cha...
Proximity Sensor Replacement Nokia Lumia 800 & N9 Screen Frame Cha...
Full Disassembly Nokia Lumia 800 Teardown - Disassembl...
Metal/Plastic Screen Frame Change Over
Nokia Lumia 800 & N9 Screen Frame Cha...
TOUCH SCREEN NOT WORKING ON NEW SCREEN?
If the touch screen does not work straight away, Sometimes the screen needs to be calibrated to the phone.
Try turning the phone off by holding the power button until the phone turns off vibrates and turns off completely. Then turn it on as normal and it should work, if not then you will need to do a factory reset.
If you need to do a factory reset please connect your Lumia 800 to your computer and backup your phone using ZUNE Software first as a factory reset will wipe your phone and you will loose all your data.
Once you have done the backup of your phone, simply follow these step to reset your phone.
1). Switch the phone off.
2). Press and hold the Volume Down, Power and Camera buttons at the same time.
3). When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held for a further five seconds.
The phone will now be reset and the touch should work perfectly.
The USB door can be 'pulled off', but I don't recommend you do unless you have a new one to replace it, as mine was loose after pulling it off.
Someone asked if I could make a video on only replacing the glass screen only.
The AMOLED display and digitizer is made of 0.45mm glass, even with my patience and experience I seriously doubt I could separate it from the digitizer without breaking.
This shows why its not possible Lumia 800/900/N9 Glass Screen Only
-------------------------------------------------------------------------------------------------------
To replace a damaged LCD (amoled)/Digitizer you'll need:
T5 star type screwdriver. (search for torx on Google Shopping).
Small Bladed or Philips Screwdriver
Plastic separation tool e.g. knife, guitar pick or credit card etc.
DIY repairs will void any warranty but may save you lots of money!
High Resolution Scan of the mainboard (5000x5000)
http://mymail.pwp.blueyonder.co.uk/lu...
Please rate & sub and I'll do my best to put some more on here...
For solutions to most technical problems try http://discussions.europe.nokia.com/
http://www.nokia.com/gb-en/products/p...
Filmed in one continuous shot (no edits) with a Panasonic HDC-SD700
Glass Screen Only Lumia 800/900/N9 Glass Screen Only
Proximity Sensor Removal Nokia Lumia 800 & N9 Screen Frame Cha...
Proximity Sensor Replacement Nokia Lumia 800 & N9 Screen Frame Cha...
Full Disassembly Nokia Lumia 800 Teardown - Disassembl...
Metal/Plastic Screen Frame Change Over
Nokia Lumia 800 & N9 Screen Frame Cha...
TOUCH SCREEN NOT WORKING ON NEW SCREEN?
If the touch screen does not work straight away, Sometimes the screen needs to be calibrated to the phone.
Try turning the phone off by holding the power button until the phone turns off vibrates and turns off completely. Then turn it on as normal and it should work, if not then you will need to do a factory reset.
If you need to do a factory reset please connect your Lumia 800 to your computer and backup your phone using ZUNE Software first as a factory reset will wipe your phone and you will loose all your data.
Once you have done the backup of your phone, simply follow these step to reset your phone.
1). Switch the phone off.
2). Press and hold the Volume Down, Power and Camera buttons at the same time.
3). When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held for a further five seconds.
The phone will now be reset and the touch should work perfectly.
The USB door can be 'pulled off', but I don't recommend you do unless you have a new one to replace it, as mine was loose after pulling it off.
Someone asked if I could make a video on only replacing the glass screen only.
The AMOLED display and digitizer is made of 0.45mm glass, even with my patience and experience I seriously doubt I could separate it from the digitizer without breaking.
This shows why its not possible Lumia 800/900/N9 Glass Screen Only
-------------------------------------------------------------------------------------------------------
To replace a damaged LCD (amoled)/Digitizer you'll need:
T5 star type screwdriver. (search for torx on Google Shopping).
Small Bladed or Philips Screwdriver
Plastic separation tool e.g. knife, guitar pick or credit card etc.
DIY repairs will void any warranty but may save you lots of money!
High Resolution Scan of the mainboard (5000x5000)
http://mymail.pwp.blueyonder.co.uk/lu...
Please rate & sub and I'll do my best to put some more on here...
For solutions to most technical problems try http://discussions.europe.nokia.com/
http://www.nokia.com/gb-en/products/p...
Filmed in one continuous shot (no edits) with a Panasonic HDC-SD700
13 سال پیش
در تاریخ 1390/10/19 منتشر شده
است.
922,175
بـار بازدید شده