How To Make A Resin Mother Mold
15.5 هزار بار بازدید -
3 سال پیش
-
In this tutorial we explain
In this tutorial we explain the process of making a 2 piece resin mother mold using out ArtKast Brushable resin. We use a water clay wall to divide the rubber mold into two halves. The silicone mold was made using our P525 silicone.
Eject-it 33 Mold Release: https://www.brickintheyard.com/produc...
P525 Platinum Silicone: https://www.brickintheyard.com/produc...
TinThix Thickener: https://www.brickintheyard.com/produc...
Silver Vinyl Resin Paint: https://www.brickintheyard.com/produc...
ArtKast Brushable Resin: https://www.brickintheyard.com/produc...
Cheap Brushes: https://www.brickintheyard.com/produc...
PartAll #2 Wax: https://www.brickintheyard.com/produc...
2300 Spray Release: https://www.brickintheyard.com/produc...
Mold Strap: https://www.brickintheyard.com/produc...
Eject-it 33 Mold Release: https://www.brickintheyard.com/produc...
P525 Platinum Silicone: https://www.brickintheyard.com/produc...
TinThix Thickener: https://www.brickintheyard.com/produc...
Silver Vinyl Resin Paint: https://www.brickintheyard.com/produc...
ArtKast Brushable Resin: https://www.brickintheyard.com/produc...
Cheap Brushes: https://www.brickintheyard.com/produc...
PartAll #2 Wax: https://www.brickintheyard.com/produc...
2300 Spray Release: https://www.brickintheyard.com/produc...
Mold Strap: https://www.brickintheyard.com/produc...
3 سال پیش
در تاریخ 1400/02/12 منتشر شده
است.
15,554
بـار بازدید شده