How to Replace Front Lower Control Arms 05-15 Toyota Tacoma
165.9 هزار بار بازدید -
4 سال پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00708
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, as well as integral ball joints that also wear. This video shows you how to install a new quality TRQ lower control arm in your 2005-15 Toyota Tacoma.
• Check here for more videos on the 2005-15 Toyota Tacoma Toyota Tacoma 2005-15 2nd Gen
This process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
Tools you will need:
• 12mm Socket http://1aau.to/oaUI/1AXAA00015
• 19mm Socket http://1aau.to/oWW/1AXAA00043
• 24mm Socket
• Blowtorch
• Cutoff Wheel http://1aau.to/o7/1AXAA00254
• Pickle Fork
• Side Cutters
• Torque Wrench http://1aau.to/oafI/1AXAA00044
• Gloves http://1aau.to/osc/1AXSS00048
• Rust Penetrant
• Safety Glasses http://1aau.to/onk/1AXAA00343
• Floor Jack http://1aau.to/oMj/1AXAA00068
• Hammer http://1aau.to/oIS/1AXAA00091
• Punch
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Toyota Tacoma 2005-15 2nd Gen: Toyota Tacoma 2005-15 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00708
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, as well as integral ball joints that also wear. This video shows you how to install a new quality TRQ lower control arm in your 2005-15 Toyota Tacoma.
• Check here for more videos on the 2005-15 Toyota Tacoma Toyota Tacoma 2005-15 2nd Gen
This process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
Tools you will need:
• 12mm Socket http://1aau.to/oaUI/1AXAA00015
• 19mm Socket http://1aau.to/oWW/1AXAA00043
• 24mm Socket
• Blowtorch
• Cutoff Wheel http://1aau.to/o7/1AXAA00254
• Pickle Fork
• Side Cutters
• Torque Wrench http://1aau.to/oafI/1AXAA00044
• Gloves http://1aau.to/osc/1AXSS00048
• Rust Penetrant
• Safety Glasses http://1aau.to/onk/1AXAA00343
• Floor Jack http://1aau.to/oMj/1AXAA00068
• Hammer http://1aau.to/oIS/1AXAA00091
• Punch
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Toyota Tacoma 2005-15 2nd Gen: Toyota Tacoma 2005-15 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
4 سال پیش
در تاریخ 1399/01/28 منتشر شده
است.
165,938
بـار بازدید شده