How To Build DML Panel Speakers with Hidden Wall Mounts Fully Suspended

Dayton Audio Exciter shown in video: https://amzn.to/2XU07lF No visible mounts, no rigid contact, no swinging on long strings, no loss of floor space. See how to build your own Wall Mounted DML or flat panel speakers with full audio suspension. These DML (Distributed Mode Loudspeakers) panel speakers are fully suspended on hidden wall mounts giving superior audio quality without sacrificing aesthetics. -Exciter placement, see NOTE-1 BELOW. -Distance from wall, NOTE-2 BELOW. To Get the Job Done: Dayton Audio Exciter shown in video (25mm 24W 4-Ohm): https://amzn.to/2EAPCxf Dayton Exciter (32mm 40W 4-Ohm QUAD Feet): https://amzn.to/2UkiCgE Dayton Exciter (32mm 40W 4-Ohm): https://amzn.to/2Ymqeo5 Dayton Exciter (25mm 20W 4-Ohm): https://amzn.to/3yNjeP8 Dayton Exciter (25mm 20W 4-Ohm Vented): https://amzn.to/3fdP1Rr Dayton Exciter (32mm 10W 8-Ohm): https://amzn.to/3fIVtyX Dayton Exciter 10W 8-Ohm PAIR (2): https://amzn.to/3bQao9r 5/32 x 2" Cotter Pins Shown in Video (10-Pack): https://amzn.to/35ivmeA 1/8 x 2" cotter pins (easier to bend than the ones in video): https://amzn.to/32qiPTb Glue Gun w/Glue Sticks: https://amzn.to/3U9kPbA The sander in the video: https://amzn.to/2XV1znz Cheaper sander: https://amzn.to/33TlHKJ Assorted sand paper: https://amzn.to/30T0y1w Assorted Sanding Blocks: https://amzn.to/33SIruf 3M 2-sided adhesive tape: https://amzn.to/3u9xphw Other Things to consider: Polk Audio PSW10 Subwoofer (Good Reviews) Pre-Ins (self-powered) or speaker line inputs: https://amzn.to/3nfAJ3N Well-Reviewed Bluetooth Amps: Bluetooth 5.0 Amp 2-Channel: https://amzn.to/3jKsQH3 Bluetooth 5.0 Amp w/SUB Out 2.1 50W+50W +100W: https://amzn.to/2VWRFnO Bluetooth 5.0 Amp w/SUB Out 2.1 50W+50W +100W: https://amzn.to/2QOP8JW Power Supply (19V) For Above Bluetooth Amps: https://amzn.to/3PeLJ2x Tube Amp Bluetooth 5.0 50W+50W w/SUB Pre-Out & Optical Input: https://amzn.to/3p1N5i8 Tube Amp Bluetooth 5.0 160W+160W w/SUB Pre-Out: https://amzn.to/3B9RF2v Deadbolt Gold Plated Banana Plugs -12-Pairs: https://amzn.to/3EY0DTa -5-Pairs: https://amzn.to/3sa5ixO Spade Connectors: https://amzn.to/3Owwe2g PROTECTIVE GEAR: -Face Masks: https://amzn.to/3D0zCiW -Safety Goggles: https://amzn.to/3fZQfNq -Ear Muffs: https://amzn.to/3QOBMrq -Shop Gloves: https://amzn.to/3aGzAgV Video Index: 0:20 Final Product Suspended on Wall 1:10 Foam Board 1:20 Marking and Cutting Rounded Corners 1:40 Sanding Corners with Palm Sander 2:03 Hand Sanding Edges and Surface 2:29 Painting w/Latex paint to match wall 2:51 Dayton Audio Exciters 3:07 Selecting and Preparing the Cotter Pins as Mounting Pins 3:39 Laying Out Mounting Pin Locations 4:10 Drilling holes for Mounting Pins 5:02 Injecting Adhesive to Anchor mounting Pins 5:38 Attaching Exciter 5:53 Selecting Material for Wall Mounts 6:26 Tying the Hanging Loop 6:45 Tying Lower Suspension Line 7:21 Mounts on The wall 7:27 Bending the upper Mounting Pins 7:48 Hanging the Panel 8:16 Checking Panel Wall Spacing after bending Mounting Pin 8:32 Sound Comparison Musical Thanks to: Doug Maxwell Song Title: Bellissimo Genre: Classical Mood: Dramatic Video Link: https://youtu.be/aqnmuhXPUu8 NOTE-1 BELOW: This video shows how this mounting system works for panels with 2/5- 3/5 mounted exciters & panels with centered exciters. For best results, single speaker channels should have exciters mounted at the 2/5 - 3/5 location for each speaker (4:09). Dual speaker channels should have one speaker with a 2/5 - 3/5 mounted exciter and the second speaker on that same channel with a centered Exciter (4:07). Thanks to Tech Ingredients for The World's Best Speakers. NOTE-2 BELOW: Like any sound emitter, these transmit quite different at surface contact than with more distance from surface. I noticed significant variations from 1 to 2.5 inches from wall surface to back of DML panel. Changes certainly continue at greater distance, but then we're no longer talking about wall mounting. I designed this wall mount system to save floor space & because I wasn't interested in displaying the mounts or the exciters (backs of DML panels). But you do need some distance from a surface. Small changes make big differences near the surface. Against the wall had the highest coloration. A foot from the wall, not so much. My experience was that at closest (back of exciter 1/8" from touching wall surface) your ears can locate the exciter position on the panel from the front surface without seeing it. Individual preferences will vary, but I was happy with the back of the exciter about one inch from the wall surface. That puts the back surface of the panel 1.5 to 2-inches from the wall surface. → Become a ScubaMoto Subscriber - https://goo.gl/iAwSQc → If this video helped, please give a thumbs up and subscribe for future videos → As an Amazon Associate I earn from qualifying purchases at no extra cost to you. Win! → Business Inquiries email: [email protected]

• #howto_style
• #ytccon
• #how_to_build_the_best_looking_dml_speakers
• #the_worlds_best_speakers
• #how_to_build_the_worlds_best_wall_mounted_dml_speakers
• #how_to_build_flat_panel_speakers_wall_mounted
• #daex25fhe_4