Baileigh 4 foot 16 Gauge Magbrake - Trick-Tools.com
7.3 هزار بار بازدید -
3 سال پیش
-
See it here:
See it here: https://www.trick-tools.com/Baileigh-...
The BB-4816M magnetic sheet metal brake is a unique box and pan brake that has nearly endless bending possibilities when compared to most conventional sheet metal brakes. Since it is not reliant on conventional finger depths, this brake can form boxes to almost any depth. A scaled stroke angle control can be set for repeatable bends time after time. It also includes a back gauge and a clamping bar with simple-to-use gap adjustments for different material thicknesses.
Features
-6 tons of magnetic pull across entire beam
-5/8 inch minimum reverse bend
-48 inch 16 gauge mild steel capacity
-220 volt 1 phase
-Rugged, simple construction, requires little maintenance
-Back gauge for repeatability
-Bend angle gauge for precise bends
Note: To achieve proper performance and prevent damage, the power supplied to this machine must be 220VAC ±5% (209VAC to 231VAC). Failure to comply will damage the machine and void the warranty. If needed, we offer a small buck-boost transformer that will lower or raise the voltage by 5-20%.
Warranty: 1-year manufacturer's warranty
•Type: magnetic
•Mild Steel Capacity: 16 gauge (1.5mm)
•Stainless Capacity: 20 gauge (.9mm)
•Working Length (inches): 48
•Max Depth Of Box (inches): unlimited
•Max Lift Of Beam (inches): unlimited
•Front To Rear Adj (inches): 1/8
•Min Reverse Bend (inches): 5/8
•Finger Nose Angle: 67.5
•Weight (pounds): 462
•Dimensions (LxWxH): 52 x 37 x 37
Trick-Tools.com
[email protected]
1.877.VAN.SANT
The BB-4816M magnetic sheet metal brake is a unique box and pan brake that has nearly endless bending possibilities when compared to most conventional sheet metal brakes. Since it is not reliant on conventional finger depths, this brake can form boxes to almost any depth. A scaled stroke angle control can be set for repeatable bends time after time. It also includes a back gauge and a clamping bar with simple-to-use gap adjustments for different material thicknesses.
Features
-6 tons of magnetic pull across entire beam
-5/8 inch minimum reverse bend
-48 inch 16 gauge mild steel capacity
-220 volt 1 phase
-Rugged, simple construction, requires little maintenance
-Back gauge for repeatability
-Bend angle gauge for precise bends
Note: To achieve proper performance and prevent damage, the power supplied to this machine must be 220VAC ±5% (209VAC to 231VAC). Failure to comply will damage the machine and void the warranty. If needed, we offer a small buck-boost transformer that will lower or raise the voltage by 5-20%.
Warranty: 1-year manufacturer's warranty
•Type: magnetic
•Mild Steel Capacity: 16 gauge (1.5mm)
•Stainless Capacity: 20 gauge (.9mm)
•Working Length (inches): 48
•Max Depth Of Box (inches): unlimited
•Max Lift Of Beam (inches): unlimited
•Front To Rear Adj (inches): 1/8
•Min Reverse Bend (inches): 5/8
•Finger Nose Angle: 67.5
•Weight (pounds): 462
•Dimensions (LxWxH): 52 x 37 x 37
Trick-Tools.com
[email protected]
1.877.VAN.SANT
3 سال پیش
در تاریخ 1400/09/01 منتشر شده
است.
7,310
بـار بازدید شده