2002 Nissan Xterra Knock Sensor relocation WITHOUT cutting wires!
95.8 هزار بار بازدید -
3 سال پیش
-
Save $2,000+ in repairs with
Save $2,000+ in repairs with this unique knock sensor relocation plug n' play method which eliminates the need to splice or cut any wires.
Tips:
-try this method before cutting into the wire harness. It will save you time, money, and will be a cleaner looking repair. Not only will you have a better long-term electrical connection, but it will also make it more likely to pass inspection during a smog test
-buy an aftermarket sensor (you will save $270+ vs. buying it from the dealer)
-tie a string/rope to the electrical connector after unplugging it. This will make it easier to fish out the wire harness in order for it to be long enough to reach the new location
-make sure to find a longer 10mm bolt and have it on hand or else your won't be able to finish this in one shot
This is for vehicles with the common 3.3L V6 JDM VG33E engine such as the 96-04 Nissan Xterra, Nissan Frontier, and Nissan Pathfinder.
Tips:
-try this method before cutting into the wire harness. It will save you time, money, and will be a cleaner looking repair. Not only will you have a better long-term electrical connection, but it will also make it more likely to pass inspection during a smog test
-buy an aftermarket sensor (you will save $270+ vs. buying it from the dealer)
-tie a string/rope to the electrical connector after unplugging it. This will make it easier to fish out the wire harness in order for it to be long enough to reach the new location
-make sure to find a longer 10mm bolt and have it on hand or else your won't be able to finish this in one shot
This is for vehicles with the common 3.3L V6 JDM VG33E engine such as the 96-04 Nissan Xterra, Nissan Frontier, and Nissan Pathfinder.
3 سال پیش
در تاریخ 1400/01/14 منتشر شده
است.
95,828
بـار بازدید شده