How To Skin Parts in Forged Carbon Fiber | DIY Chopped Carbon Fiber Tutorial
165.4 هزار بار بازدید -
2 سال پیش
-
SEE UPDATES BELOW TO MAKE
SEE UPDATES BELOW TO MAKE THE BEST PRODUCT!
This video will teach you the start to finish process to skinning parts in real chopper carbon fiber (often referred to as forged carbon fiber, though the process is a bit different). This video goes over everything from part preparation, to resin and carbon fiber needed, to sanding, clear coating, and polishing, so your forged carbon fiber parts come out great!
UPDATES: After a year, I can confirm that I'd recommend using a higher quality clear coat. This clear coat has faded and become rough. I'd recommend spending money for a higher quality clear coat. Also, be sure to use a UV resin designed for outdoors!
Materials Used (Affiliate links for which I may be compensated)
Venom Composites Chopped Carbon: https://amzn.to/3JM2IVx
Carbon Fiber Roller: https://amzn.to/3AaBF2K
Peel Ply: https://amzn.to/3SGLaOr
Sanding Disks: https://amzn.to/3QhDoZU
Sand Paper: https://amzn.to/3vXbIRY
Polish: https://amzn.to/3zKmDQ4
End Screen Music: 3mbrace - Issues https://spoti.fi/3hpG1b0
0:00 Video Introduction
0:26 Part Introduction
0:44 Bodywork
3:35 Carbon Materials
5:12 Preparation
7:25 Carbon Layup
11:07 Sanding and Recoat
13:30 Clear Coat
17:15 Final Touches / Outro
*All links are affiliate links, purchasing through them means a small portion of the total cost goes towards supporting the channel, and there's NO additional cost to you! CashedOutCars is NOT liable for any damage done as a result of videos posted on this channel. Work on and modify your car at your own risk!
This video will teach you the start to finish process to skinning parts in real chopper carbon fiber (often referred to as forged carbon fiber, though the process is a bit different). This video goes over everything from part preparation, to resin and carbon fiber needed, to sanding, clear coating, and polishing, so your forged carbon fiber parts come out great!
UPDATES: After a year, I can confirm that I'd recommend using a higher quality clear coat. This clear coat has faded and become rough. I'd recommend spending money for a higher quality clear coat. Also, be sure to use a UV resin designed for outdoors!
Materials Used (Affiliate links for which I may be compensated)
Venom Composites Chopped Carbon: https://amzn.to/3JM2IVx
Carbon Fiber Roller: https://amzn.to/3AaBF2K
Peel Ply: https://amzn.to/3SGLaOr
Sanding Disks: https://amzn.to/3QhDoZU
Sand Paper: https://amzn.to/3vXbIRY
Polish: https://amzn.to/3zKmDQ4
End Screen Music: 3mbrace - Issues https://spoti.fi/3hpG1b0
0:00 Video Introduction
0:26 Part Introduction
0:44 Bodywork
3:35 Carbon Materials
5:12 Preparation
7:25 Carbon Layup
11:07 Sanding and Recoat
13:30 Clear Coat
17:15 Final Touches / Outro
*All links are affiliate links, purchasing through them means a small portion of the total cost goes towards supporting the channel, and there's NO additional cost to you! CashedOutCars is NOT liable for any damage done as a result of videos posted on this channel. Work on and modify your car at your own risk!
2 سال پیش
در تاریخ 1401/05/25 منتشر شده
است.
165,494
بـار بازدید شده