UPA3 WOHLHAUPTER - Boring Head Unboxing
1.7 هزار بار بازدید -
2 سال پیش
-
UPA3 Wohlhaupter Boring Head: Set
UPA3 Wohlhaupter Boring Head: Set up and using Boring and Facing head with SK30 attachment, machining a round corner like a milling machine, If you're dreaming of a boring head, this could be your choice!
It was made in 1971, used on Deckel FP1 mill, It is a piece of mechanics of yesteryear ( It Is automatic), very rare to find in the conditions of the video.
Here you can find the result that i got!
Chapters:
00:00 Intro
00:26 Describing UP3 Boring Head
02:08 How it works
04:38 Machining to trasform the MT4 to NT30
05:31 Description of round edge to make
06:10 Machining the round edge
07:55 Final results and considerations
08:16 Conclusion and Bye
In this video I used:
UPA3 Wohlhaupter Auto Boring Head (1971)
Sieg SX3L milling machine (2019)
Join the channel !!
If you like my videos, don't forget to click LIKE & SUBSCRIBE !!!
AB-SHOP
#machineshop #hobbymachinist #machinist
?sub_confirmation=1
It was made in 1971, used on Deckel FP1 mill, It is a piece of mechanics of yesteryear ( It Is automatic), very rare to find in the conditions of the video.
Here you can find the result that i got!
Chapters:
00:00 Intro
00:26 Describing UP3 Boring Head
02:08 How it works
04:38 Machining to trasform the MT4 to NT30
05:31 Description of round edge to make
06:10 Machining the round edge
07:55 Final results and considerations
08:16 Conclusion and Bye
In this video I used:
UPA3 Wohlhaupter Auto Boring Head (1971)
Sieg SX3L milling machine (2019)
Join the channel !!
If you like my videos, don't forget to click LIKE & SUBSCRIBE !!!
AB-SHOP
#machineshop #hobbymachinist #machinist
?sub_confirmation=1
2 سال پیش
در تاریخ 1401/02/24 منتشر شده
است.
1,723
بـار بازدید شده