Seldén furlex 200 S - how to mount the jib sail
9.1 هزار بار بازدید -
5 سال پیش
-
My sails is renovated by
My sails is renovated by a sailmaker in Aarhus Denmark due to some small repairs.
The genua is then almost ready to mount but before that I seal of a small hole in one of the sail pocket on the genua.
Info from the seldén furlex manual :
1. Tension the forestay for hard close-reach sailing before the sail is hoisted.
2. Turn the tack ring counter-clockwise if the furling line exits on the port side of the drum.
3. When line exits on the port side of the line drum, the sail should be hoisted in the starboard groove.
Note: The Swedish made instrument is in the next video.
The genua is then almost ready to mount but before that I seal of a small hole in one of the sail pocket on the genua.
Info from the seldén furlex manual :
1. Tension the forestay for hard close-reach sailing before the sail is hoisted.
2. Turn the tack ring counter-clockwise if the furling line exits on the port side of the drum.
3. When line exits on the port side of the line drum, the sail should be hoisted in the starboard groove.
Note: The Swedish made instrument is in the next video.
5 سال پیش
در تاریخ 1398/05/25 منتشر شده
است.
9,147
بـار بازدید شده