ヘッドライト専用2液性クリア塗料！コーティングより長持ち
522.2 هزار بار بازدید -
2 سال پیش
-
Headlight Refomerℕ(Two-component clear paint exclusively
Headlight Refomerℕ
(Two-component clear paint exclusively for headlights)
General urethane clear is a two-component paint for body use.
When used on polycarbonate and other plastics, chemical cracks may occur.
This is caused by the solvents contained in urethane clear paints.
Headlight Trifomerℕ, which is a special product for headlights, is applied to the headlights.
We have never had any cracks or other defects occur.
The spray mist is fine and easy to handle with little dripping.
Although it takes a little time and effort to apply the paint, such as masking work, it is much easier to apply than coatings.
The film is thicker and more durable than coatings.
Spray paint often sprays around more than expected.
In particular, two-component clear paints have a strong film that is difficult to remove, so be careful of paint mist.
Be very careful of paint mist.
Wearing a painting mask is also essential.
After sandpaper polishing to No. 320→400→600→800→1000→1200→1500→2000, spray the compound finish.
If the yellowing or fogging of the headlight lenses is mild, start with No. 1000.
(Two-component clear paint exclusively for headlights)
General urethane clear is a two-component paint for body use.
When used on polycarbonate and other plastics, chemical cracks may occur.
This is caused by the solvents contained in urethane clear paints.
Headlight Trifomerℕ, which is a special product for headlights, is applied to the headlights.
We have never had any cracks or other defects occur.
The spray mist is fine and easy to handle with little dripping.
Although it takes a little time and effort to apply the paint, such as masking work, it is much easier to apply than coatings.
The film is thicker and more durable than coatings.
Spray paint often sprays around more than expected.
In particular, two-component clear paints have a strong film that is difficult to remove, so be careful of paint mist.
Be very careful of paint mist.
Wearing a painting mask is also essential.
After sandpaper polishing to No. 320→400→600→800→1000→1200→1500→2000, spray the compound finish.
If the yellowing or fogging of the headlight lenses is mild, start with No. 1000.
2 سال پیش
در تاریخ 1401/05/15 منتشر شده
است.
522,296
بـار بازدید شده