DIY: How to make a skirt or a dress with set-in gores. How to cut and stitch set-in gores.
47 هزار بار بازدید -
6 سال پیش
-
Today we want to show
Today we want to show you how to work with set-in gores.
I wasn't planning to shoot this tutorial, but I decided to do it after showing you the dress with such gores.
I realized that it might be difficult for some of you to stitch the set-in gores.
Today we will show you the whole process very thoroughly.
We'll tell you everything very thoroughly, and we will show you what to pay attention to.
We need to cut an opening first.
It's very important that you shouldn’t cut to the end of the gore.
Next we need to double the angle part with a piece of interfacing.
After that we’ll make the cut longer, and only then tack the 2nd edge.
It’s also very important that you should stitch not from gore side, but the wrong side of the item.
Otherwise, you wouldn’t be able to control what is happening with the angle.
Natalie will show you how to edge the gore with an overlocker.
It’s very important to be able to iron the seams accurately.
I’m just showing you the technique.
Make sure that the gore is accurate and iron the part above it.
It makes me really happy that you liked the series about dresses with dolman sleeves.
Your support means a lot to me!
Be different and beautiful..
My name is Paukshte Irina.
Guys, please, subscribe to my channel, write comments, share videos and press the “like” and “bell” buttons!
I really need your support!
Thank you!
I wasn't planning to shoot this tutorial, but I decided to do it after showing you the dress with such gores.
I realized that it might be difficult for some of you to stitch the set-in gores.
Today we will show you the whole process very thoroughly.
We'll tell you everything very thoroughly, and we will show you what to pay attention to.
We need to cut an opening first.
It's very important that you shouldn’t cut to the end of the gore.
Next we need to double the angle part with a piece of interfacing.
After that we’ll make the cut longer, and only then tack the 2nd edge.
It’s also very important that you should stitch not from gore side, but the wrong side of the item.
Otherwise, you wouldn’t be able to control what is happening with the angle.
Natalie will show you how to edge the gore with an overlocker.
It’s very important to be able to iron the seams accurately.
I’m just showing you the technique.
Make sure that the gore is accurate and iron the part above it.
It makes me really happy that you liked the series about dresses with dolman sleeves.
Your support means a lot to me!
Be different and beautiful..
My name is Paukshte Irina.
Guys, please, subscribe to my channel, write comments, share videos and press the “like” and “bell” buttons!
I really need your support!
Thank you!
6 سال پیش
در تاریخ 1397/03/11 منتشر شده
است.
47,027
بـار بازدید شده