Simple Water Level Indicator with Buzzer
80 هزار بار بازدید -
3 سال پیش
-
In this electronics project, I
In this electronics project, I have made a simple Water Level Indicator with buzzer. To make this automatic water tank level indicator circuit I have used only BC547 NPN transistors so no IC is required.
The alarm will automatically start when the water reaches the maximum level.
Required Components for this BC547 project
1. 1k Resistors 4no (R1, R3, R5, R7)
2. 10k Resistors 4no (R2, R4, R6, R8)
3. BC547 NPN Transistors 4no
4. 5-mm LEDs 4no
5. DC Buzzer (5V)
6. Switch
7. Terminal connector
8. 5V DC Supply
Download the PCB Layout of the Water Level Indicator project from the following article.
https://easyelectronicsproject.com/mi...
Latest Video:
[NEW] Automatic Pump controller using 555 IC: Automatic Water Pump Controller proje...
I have covered the following topic in this DIY water level indicator project:
00:13 Required components for this mini-project.
00:28 How to make homemade PCB for the water level sensor circuit.
03:09 Connect all the water level sensing wires with PCB
03:39 Water tank level indicator circuit diagram.
Here I have used the 5V DC supply, but If you want to use the 12V DC supply, then connect a 12V DC buzzer. No other changes are required in the circuit for 12V.
During the video, I have also explained how to make this liquid level monitoring circuit on the homemade PCB. And also shared the PCB Layout so, you can make this water level sensor using buzzer circuit on the plastic sheet.
You can use this circuit in any overhead or underground water tank to measure the water level. This simple homemade project is very useful to save water and electricity.
If you face any issues please let me know in the comment section.
#waterlevelindicator #bc547
-------------------------------------------------------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
------------------------------------------------------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Website: https://easyelectronicsproject.com/
Facebook: Facebook: techstudycell
Instagram: Instagram: techstudycell
Telegram: https://t.me/techstudycell/
-------------------------------------------------------
Other useful videos:
Automatic Water Level Controller for Submersible Pump
Automatic Water Level Controller for ...
How To Make Motion Sensor Light Switch using CD4017 & IR sensor
How To Make Motion Sensor Light Switc...
IR Remote Control ON-OFF Switch using 4017 IC & Relay
How to make wireless IR Remote Contro...
How to calculate resistor value for LEDs in a circuit for 9V and 12V
How to select resistor value for LED ...
The alarm will automatically start when the water reaches the maximum level.
Required Components for this BC547 project
1. 1k Resistors 4no (R1, R3, R5, R7)
2. 10k Resistors 4no (R2, R4, R6, R8)
3. BC547 NPN Transistors 4no
4. 5-mm LEDs 4no
5. DC Buzzer (5V)
6. Switch
7. Terminal connector
8. 5V DC Supply
Download the PCB Layout of the Water Level Indicator project from the following article.
https://easyelectronicsproject.com/mi...
Latest Video:
[NEW] Automatic Pump controller using 555 IC: Automatic Water Pump Controller proje...
I have covered the following topic in this DIY water level indicator project:
00:13 Required components for this mini-project.
00:28 How to make homemade PCB for the water level sensor circuit.
03:09 Connect all the water level sensing wires with PCB
03:39 Water tank level indicator circuit diagram.
Here I have used the 5V DC supply, but If you want to use the 12V DC supply, then connect a 12V DC buzzer. No other changes are required in the circuit for 12V.
During the video, I have also explained how to make this liquid level monitoring circuit on the homemade PCB. And also shared the PCB Layout so, you can make this water level sensor using buzzer circuit on the plastic sheet.
You can use this circuit in any overhead or underground water tank to measure the water level. This simple homemade project is very useful to save water and electricity.
If you face any issues please let me know in the comment section.
#waterlevelindicator #bc547
-------------------------------------------------------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
------------------------------------------------------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Website: https://easyelectronicsproject.com/
Facebook: Facebook: techstudycell
Instagram: Instagram: techstudycell
Telegram: https://t.me/techstudycell/
-------------------------------------------------------
Other useful videos:
Automatic Water Level Controller for Submersible Pump
Automatic Water Level Controller for ...
How To Make Motion Sensor Light Switch using CD4017 & IR sensor
How To Make Motion Sensor Light Switc...
IR Remote Control ON-OFF Switch using 4017 IC & Relay
How to make wireless IR Remote Contro...
How to calculate resistor value for LEDs in a circuit for 9V and 12V
How to select resistor value for LED ...
3 سال پیش
در تاریخ 1400/07/02 منتشر شده
است.
80,083
بـار بازدید شده