How to Replace EVAP Vent Valve 2010-16 Buick Lacrosse
27.4 هزار بار بازدید -
3 سال پیش
-
Buy Now!New Vapor Canister Vent
Buy Now!
New Vapor Canister Vent Solenoid Valve from 1AAuto.com http://1aau.to/ia/DMEEV00007
Vapor purge valves are an important part of the EVAP system that allow the contained fuel vapors to be released into the combustion chamber under certain conditions. Modern purge valves are controlled by the vehicle’s computer system, and electronic solenoids. Failure of the valve or the control solenoid will result in an emissions trouble code that could prevent passing emissions testing. This video shows you how to install a new vapor purge valve or purge valve solenoid on your 2010-16 Buick Lacrosse.
• Check here for more videos on the 2010-16 Buick Lacrosse: Buick Lacrosse 2nd Generation 2010-2016
This process should be similar on the following vehicles:
2010 Buick LaCrosse
2011 Buick LaCrosse
2012 Buick LaCrosse
2013 Buick LaCrosse
2014 Buick LaCrosse
2015 Buick LaCrosse
2016 Buick LaCrosse
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• 10mm Socket http://1aau.to/oa/1AXAA00017
• T25 Socket http://1aau.to/oa/1AXAA00008
Subscribe: @trq
Check out our playlist:
Buick Lacrosse 2nd Generation 2010-2016: Buick Lacrosse 2nd Generation 2010-2016
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Vapor Canister Vent Solenoid Valve from 1AAuto.com http://1aau.to/ia/DMEEV00007
Vapor purge valves are an important part of the EVAP system that allow the contained fuel vapors to be released into the combustion chamber under certain conditions. Modern purge valves are controlled by the vehicle’s computer system, and electronic solenoids. Failure of the valve or the control solenoid will result in an emissions trouble code that could prevent passing emissions testing. This video shows you how to install a new vapor purge valve or purge valve solenoid on your 2010-16 Buick Lacrosse.
• Check here for more videos on the 2010-16 Buick Lacrosse: Buick Lacrosse 2nd Generation 2010-2016
This process should be similar on the following vehicles:
2010 Buick LaCrosse
2011 Buick LaCrosse
2012 Buick LaCrosse
2013 Buick LaCrosse
2014 Buick LaCrosse
2015 Buick LaCrosse
2016 Buick LaCrosse
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• 10mm Socket http://1aau.to/oa/1AXAA00017
• T25 Socket http://1aau.to/oa/1AXAA00008
Subscribe: @trq
Check out our playlist:
Buick Lacrosse 2nd Generation 2010-2016: Buick Lacrosse 2nd Generation 2010-2016
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
3 سال پیش
در تاریخ 1400/06/17 منتشر شده
است.
27,484
بـار بازدید شده