Racket and Stack It - Big Bar Casting - Including Total Stack Weight - ASMR Metal Melting - Tennis
368.9 هزار بار بازدید -
5 سال پیش
-
Today I meltdown some old
Today I meltdown some old rackets that I haven’t used in years only one of the brackets was broken but I’m in the melting game not sporting game👍🏻.
Now guys if you want to buy a forge or a devil’s furnace, be sure to email me at [email protected] to get a personal code with a 5% discount, And If you like the rings that I wear in this video, be sure to check this link below and use my codes to get some discounts for some absolutely amazing rings.
************************************************** ******************
RING WEB SITE
https://gthic.com/?aff=27
Want 20% off then Use the code Dion20
************************************************** ******************
I have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online name.
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
******************DISCLAIMER**********************
DO NOT TRY THIS AT HOME
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
*******************************************************
My other 230+ videos
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
https://www.seevid.ir/fa/w/fYpWL-t3K8s
Follow me on Facebook
https://www.facebook.com/Bigstackd-Casting-293591814685373/
Follow me on Instagram
https://www.instagram.com/bigstackd_casting/?hl=en
Steel Mold supplied by ArtByAdrock
************************************************** ******************
Forge supplied by my friends in Devil-Forge. They sell a large selection of forges, ovens, burners and even the most incredible 5-burner ironworking furnace on the Internet.
DEVIL FORCE MAIN PAGE
http://devil-forge.com/
EBay Store
https://www.ebay.com.au/itm/FB2Mb-10KG-GAS-METAL-MELTING-FURNACE-Propane-Forge-Copper-Brass-Bronze-Silver/253796844325?_trksid=p2485497.m4902.l9144
************************************************** ******************
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it👌🏻😁.
Racket and Stack It - Big Bar Casting - Including Total Stack Weight - ASMR Metal Melting
5 سال پیش
در تاریخ 1398/11/11 منتشر شده
است.
368,978
بـار بازدید شده