Como hacer un cielo raso en drywall
1.7 میلیون بار بازدید -
4 سال پیش
-
See how I show you
See how I show you how to make a ceiling in drywall easily in a room
materials:
omegas, joists, angles, joists, plasterboard sheets, 1-inch sheet screws, structure screws for drywall, stucco or putty for cardboard plaster, paper tape for drywall, type 2 vinyl paint, sandpaper number 150.
instructions for placing the metal structure:
First of placing the angle around the room, it is measured from the longest side, starting from the corner or corner every 61 centimeters is marked to where the wall ends, you can get 3 or 4 measures of 61 and the last one less than 61cm. You do the same process on the other long side of the wall.
then in each mark you place the omegas in the center of the points.
then, above the omegas, you place the joists with distances of 80 centimeters.
Then it is angled to the joists, in this way to level the structure and to support the weight.
materials:
omegas, joists, angles, joists, plasterboard sheets, 1-inch sheet screws, structure screws for drywall, stucco or putty for cardboard plaster, paper tape for drywall, type 2 vinyl paint, sandpaper number 150.
instructions for placing the metal structure:
First of placing the angle around the room, it is measured from the longest side, starting from the corner or corner every 61 centimeters is marked to where the wall ends, you can get 3 or 4 measures of 61 and the last one less than 61cm. You do the same process on the other long side of the wall.
then in each mark you place the omegas in the center of the points.
then, above the omegas, you place the joists with distances of 80 centimeters.
Then it is angled to the joists, in this way to level the structure and to support the weight.
4 سال پیش
در تاریخ 1399/11/01 منتشر شده
است.
1,747,659
بـار بازدید شده