Probably the BEST $70 STACK right now - SpeedyBee F405 V3, ESC and Flight controller FPV Drone Stack
25.7 هزار بار بازدید -
2 سال پیش
-
This new stack from SpeedyBee
This new stack from SpeedyBee appears to be one of the best budget 4-in-1 ESC/flight controller stacks, thanks to it's rich feature set and very reasonable price of $70.
SpeedyBee Website: https://www.speedybee.com/speedybee-f...
SpeedyBee F405 V3 Manual: https://d18j4b7oq8p8jg.cloudfront.net...
Disclosure: SpeedyBee did send me this new stack to test out, free of charge. The opinions expressed in this video are my own (Adam, here) and have not been approved by SpeedyBee before publishing.
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: Patreon: RCwithAdam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
SpeedyBee Website: https://www.speedybee.com/speedybee-f...
SpeedyBee F405 V3 Manual: https://d18j4b7oq8p8jg.cloudfront.net...
Disclosure: SpeedyBee did send me this new stack to test out, free of charge. The opinions expressed in this video are my own (Adam, here) and have not been approved by SpeedyBee before publishing.
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: Patreon: RCwithAdam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
2 سال پیش
در تاریخ 1401/06/23 منتشر شده
است.
25,752
بـار بازدید شده