Ep5. Install Glass Window In Fish Pond
43.7 هزار بار بازدید -
3 سال پیش
-
This is the only time
This is the only time I felt very nervous in the entire backyard garden pond series. I have never installed a glass window prior to this and I am very excited that glass window is installed in the pond without any leakages. Before installing the glass window, I built a small frame on the inside of the pond where pond glass can fit. I covered the entire inside of fish pond with underlay and liner and pre-cut the liner where glass window would sit. This is something not many do but I thought to give it a go and it has been a successful pond window installation.
Pond glass cost me quite a lot, it is 25.5mm toughen and laminated glass with polish edges. Dims are 142cm in length and 62cm in height. I have used idealseal MS290 as a pond sealant and used 2 tubes in total. I was very confident with my initial bead on the inside but later on found out that it wasn't enough. I filled remaining areas from the outside without making any mess. Window shims were used to lift the glass slightly off the frame and area was filled with silicone. If you want to learn in detail how to install glass window in a fish pond then read my article here https://www.fishaholic.net/2021/09/ho...
Black paint around the glass frame, black silicone, black liner blends in really well. I decided to paint the top and 8 corner legs of fish pond black too. Let me know what do you think about this backyard garden pond and how good the glass looks at the front. I have some other landscape ideas which I will add to this series as I still have to build a filter for this pond and choose fish that could go in this pond. Let me know in the comment section your favorite pond fish.
This is not the best garden pond in the backyard but I have put in quite a lot of hours and energy into building this pond. I really hope you will enjoy this video and might inspire some of you to build your own above ground fish pond. Please let me know your views in the comment section below and share this video if you find it useful and informative.
Thank You
#gardenpond #diypond #fishpond
Pond glass cost me quite a lot, it is 25.5mm toughen and laminated glass with polish edges. Dims are 142cm in length and 62cm in height. I have used idealseal MS290 as a pond sealant and used 2 tubes in total. I was very confident with my initial bead on the inside but later on found out that it wasn't enough. I filled remaining areas from the outside without making any mess. Window shims were used to lift the glass slightly off the frame and area was filled with silicone. If you want to learn in detail how to install glass window in a fish pond then read my article here https://www.fishaholic.net/2021/09/ho...
Black paint around the glass frame, black silicone, black liner blends in really well. I decided to paint the top and 8 corner legs of fish pond black too. Let me know what do you think about this backyard garden pond and how good the glass looks at the front. I have some other landscape ideas which I will add to this series as I still have to build a filter for this pond and choose fish that could go in this pond. Let me know in the comment section your favorite pond fish.
This is not the best garden pond in the backyard but I have put in quite a lot of hours and energy into building this pond. I really hope you will enjoy this video and might inspire some of you to build your own above ground fish pond. Please let me know your views in the comment section below and share this video if you find it useful and informative.
Thank You
#gardenpond #diypond #fishpond
3 سال پیش
در تاریخ 1400/07/29 منتشر شده
است.
43,700
بـار بازدید شده