Tuning a Cheap Ball Screw (2 methods of nut overhaul)
72.1 هزار بار بازدید -
3 سال پیش
-
In this video, we tune-up
In this video, we tune-up a cheap Chinese ball screw from the CNC build. We try two methods and conclude the best involves a dismantle, clean, and reassemble...
This one is a rolled screw with a 5mm pitch. It was from the ebay seller "linearmotionbearings2008". The ball bearings benefited from a good clean, stopping excessive wear and jerky linear motion.
Thanks for watching, please consider subscribing, and check out our main channel Flowering Elbow flowering_elbow
Lets Connect!
Patreon: Patreon: floweringelbow
Our website: http://www.FloweringElbow.org
FB: Facebook: floweringelbow
Subscribe to Flowering Elbow for more diy upcycling fun! https://goo.gl/7tFFPu
This one is a rolled screw with a 5mm pitch. It was from the ebay seller "linearmotionbearings2008". The ball bearings benefited from a good clean, stopping excessive wear and jerky linear motion.
Thanks for watching, please consider subscribing, and check out our main channel Flowering Elbow flowering_elbow
Lets Connect!
Patreon: Patreon: floweringelbow
Our website: http://www.FloweringElbow.org
FB: Facebook: floweringelbow
Subscribe to Flowering Elbow for more diy upcycling fun! https://goo.gl/7tFFPu
3 سال پیش
در تاریخ 1400/03/11 منتشر شده
است.
72,153
بـار بازدید شده