Meshing Complex Biomechanical Parts including Bones and Soft Tissues in Abaqus part 1
2.8 هزار بار بازدید -
3 سال پیش
-
Our telegram channel for Abaqus
Our telegram channel for Abaqus and Q & A: https://t.me/abaqus_asist
Our LinkedIn page: LinkedIn: femexir
If you want to be informed about our 50% discount codes and other announcements, join our Telegram channel or follow us in LinkedIn.
contact info for using our services:
[email protected]
Comprehensive Abaqus Package: Comprehensive Abaqus Package
Including 39 hours of step-by-step tutorials.
Chapter 5 of the package is related to this tutorial.
Don’t hesitate to ask any questions you might have about the explanations presented in this video using the comments below. We try to answer all questions regarding the video details in the comments below.
In biomechanical engineering, the Mimics and 3-matic software are used to create geometry and CAD file from the MRI or radiology pictures of bones and soft tissues. The generated STEP format of the geometry can be imported to the Abaqus for performing structural analysis.
Most of the time, the imported geometries are not simple and cannot be meshed easily. Actually there will be a lot of extra features in these geometries that can cause problems in generating an optimum mesh with a minimum number of elements and high quality elements.
In the first part of this tutorial, we will focus on how to remove these extra features from a complex bone imported into the Abaqus mesh module and remove some of its extra features. After this procedure, the part/geometry is ready to be meshed.
table of content:
- Importing CAD file into Abaqus part module
- Flow chart of meshing complex 3D solids including biomechanical parts in Abaqus
- Examples of extra features that must be removed
- How to select features for defeaturing
- Examples of extra features that must be kept
- General procedure of defeaturing
- Virtual topology tools
- Automatic virtual topology creation
- Defeaturing by using automatic tools
- Defeaturing by using manual tools
- What will be explained in the second part of this tutorial
#abaqus
#mesh
#mesh_module
#abaqus_mesh_module
#biomechanic
#biomechanical_engineering
#defeaturing
#defeature
#virtual_topology
#abaqus_biomechanics
Our LinkedIn page: LinkedIn: femexir
If you want to be informed about our 50% discount codes and other announcements, join our Telegram channel or follow us in LinkedIn.
contact info for using our services:
[email protected]
Comprehensive Abaqus Package: Comprehensive Abaqus Package
Including 39 hours of step-by-step tutorials.
Chapter 5 of the package is related to this tutorial.
Don’t hesitate to ask any questions you might have about the explanations presented in this video using the comments below. We try to answer all questions regarding the video details in the comments below.
In biomechanical engineering, the Mimics and 3-matic software are used to create geometry and CAD file from the MRI or radiology pictures of bones and soft tissues. The generated STEP format of the geometry can be imported to the Abaqus for performing structural analysis.
Most of the time, the imported geometries are not simple and cannot be meshed easily. Actually there will be a lot of extra features in these geometries that can cause problems in generating an optimum mesh with a minimum number of elements and high quality elements.
In the first part of this tutorial, we will focus on how to remove these extra features from a complex bone imported into the Abaqus mesh module and remove some of its extra features. After this procedure, the part/geometry is ready to be meshed.
table of content:
- Importing CAD file into Abaqus part module
- Flow chart of meshing complex 3D solids including biomechanical parts in Abaqus
- Examples of extra features that must be removed
- How to select features for defeaturing
- Examples of extra features that must be kept
- General procedure of defeaturing
- Virtual topology tools
- Automatic virtual topology creation
- Defeaturing by using automatic tools
- Defeaturing by using manual tools
- What will be explained in the second part of this tutorial
#abaqus
#mesh
#mesh_module
#abaqus_mesh_module
#biomechanic
#biomechanical_engineering
#defeaturing
#defeature
#virtual_topology
#abaqus_biomechanics
3 سال پیش
در تاریخ 1400/07/20 منتشر شده
است.
2,802
بـار بازدید شده