How to Install Power Locks in Nissan Hardbody D21
50.2 هزار بار بازدید -
4 سال پیش
-
Today we are installing power
Today we are installing power locks on Bryan's Nissan Hardbody D21!
The power lock kit we used: https://amzn.to/3eyNQeZ (Affiliate)
Alternate Kit to try: https://amzn.to/3fqmrwe (Affiliate)
Trim removal kit: https://amzn.to/2I2rPYI (Affiliate)
Just like we did on the Mazda, we've now installed power locks on the Hardbody! Check out this guide on how to add them to your Nissan. Super easy and a mod definitely worth doing!
I'm going to be showing you exactly where I placed the actuators inside the doors clearing all moving parts and glass. I also show you how to route your wiring and where I installed my central lock unit to control everything.
Some tools you will need are going to be:
Phillips screwdriver, Drill, 1/8 Drill bit, Electrical tape, Zip Ties, Blue Loctite
→ Support the channel here: https://www.flakegarage.com
→ Follow us on Instagram: Instagram: flakegarage
→ As an Amazon Associate I earn from qualifying purchases.
→ Check my Amazon page: https://www.amazon.com/shop/flakegarage
Disclaimer:
Due to factors beyond the control of Flake Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Flake Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flake Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flake Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flake Garage.
Intro (0:00)
Parts in Kit (0:42)
Removing Door Panels (1:24)
Planning Actuator Location (3:09)
Drill Location (4:07)
Lock Mechanism Hardware (4:56)
Wiring Harness Trimming (5:30)
Control Box Location (7:29)
Wiring Routing (8:25)
Power & Ground Location (9:49)
Testing Lock Unit (10:41)
Review (11:21)
Final Thoughts (13:13)
Bloopers (14:45)
#nissan #hardbody #powerlocks #d21 #nissanhardbody #nissand21 #hardbodypowerlocks #d21powerlocks #powerlockinstall #howtoinstallpowerlocks #flakegarage #flakegaragehardbody #flakegarageinstall #install #powerlocks #minitruckin
The power lock kit we used: https://amzn.to/3eyNQeZ (Affiliate)
Alternate Kit to try: https://amzn.to/3fqmrwe (Affiliate)
Trim removal kit: https://amzn.to/2I2rPYI (Affiliate)
Just like we did on the Mazda, we've now installed power locks on the Hardbody! Check out this guide on how to add them to your Nissan. Super easy and a mod definitely worth doing!
I'm going to be showing you exactly where I placed the actuators inside the doors clearing all moving parts and glass. I also show you how to route your wiring and where I installed my central lock unit to control everything.
Some tools you will need are going to be:
Phillips screwdriver, Drill, 1/8 Drill bit, Electrical tape, Zip Ties, Blue Loctite
→ Support the channel here: https://www.flakegarage.com
→ Follow us on Instagram: Instagram: flakegarage
→ As an Amazon Associate I earn from qualifying purchases.
→ Check my Amazon page: https://www.amazon.com/shop/flakegarage
Disclaimer:
Due to factors beyond the control of Flake Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Flake Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flake Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flake Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flake Garage.
Intro (0:00)
Parts in Kit (0:42)
Removing Door Panels (1:24)
Planning Actuator Location (3:09)
Drill Location (4:07)
Lock Mechanism Hardware (4:56)
Wiring Harness Trimming (5:30)
Control Box Location (7:29)
Wiring Routing (8:25)
Power & Ground Location (9:49)
Testing Lock Unit (10:41)
Review (11:21)
Final Thoughts (13:13)
Bloopers (14:45)
#nissan #hardbody #powerlocks #d21 #nissanhardbody #nissand21 #hardbodypowerlocks #d21powerlocks #powerlockinstall #howtoinstallpowerlocks #flakegarage #flakegaragehardbody #flakegarageinstall #install #powerlocks #minitruckin
4 سال پیش
در تاریخ 1399/09/11 منتشر شده
است.
50,213
بـار بازدید شده