BMW F80 F82 F87 M3 M4 M2 - How to set the car into dyno mode - bootmod3
22 هزار بار بازدید -
6 سال پیش
-
This is a quick video
This is a quick video that shows how to set your BMW M2 / M3 / M4 into dyno mode.
Steps:
1. Close door
2. Ignition ON
3. Wait until all messages are gone
4. Hold left button on the dash for approx 15 seconds
5. Go to number 3 in the menu
6. Hold button until a new screen appears
7. Hold the traction button until DSC is OFF
8. Press the left button on speedo and speedo will go back to normal
9. Start the car, set it setting to Sport Mode (do not use M1/2) buttons as it can remote traction and you will have to repeat.
Tuning available here, instant activation:
https://www.protuningfreaks.com/produ...
https://www.protuningfreaks.com/colle...
Steps:
1. Close door
2. Ignition ON
3. Wait until all messages are gone
4. Hold left button on the dash for approx 15 seconds
5. Go to number 3 in the menu
6. Hold button until a new screen appears
7. Hold the traction button until DSC is OFF
8. Press the left button on speedo and speedo will go back to normal
9. Start the car, set it setting to Sport Mode (do not use M1/2) buttons as it can remote traction and you will have to repeat.
Tuning available here, instant activation:
https://www.protuningfreaks.com/produ...
https://www.protuningfreaks.com/colle...
6 سال پیش
در تاریخ 1397/07/15 منتشر شده
است.
22,056
بـار بازدید شده