Using Ultrasonic Sensor HC-SR04 with Arduino

Maker 101
Maker 101
34.8 هزار بار بازدید - 8 سال پیش - In this Arduino Tutorial we
In this Arduino Tutorial we will learn how the HC-SR04 Ultrasonic Sensor works and how to use it with the Arduino Board.

Required Hardware:
Arduino Board: https://amzn.to/2LZr6t4
Ultrasonic Sensor HC-SR04: https://amzn.to/3s4SbdT
Breadboard: https://amzn.to/3qxLxwm
Jumper Wires: https://amzn.to/3doetmT

Recommended Items:                
Use Your Muscles in Project - https://amzn.to/3wdL45C
37 Sensor & Module Packages - https://amzn.to/3m66WeQ
Try this Robot Arm - https://amzn.to/3fq8DCl
Best Resin 3D Printer - https://amzn.to/39tY8KB
Arduino Compatible Kits - http://bit.ly/2J2AFF7
Banggood Spring Sale - https://bit.ly/3slMbOn

Connections:
The HC-SR04 Ultrasonic Module has 4 pins, Ground, VCC, Trig and Echo. The Ground and the VCC pins of the module needs to be connected to the Ground and the 5 volts pins on the Arduino Board respectively and the trig and echo pins to any Digital I/O pin on the Arduino Board.

The HC-SR04 sensor attach to the Breadboard
The Sensor VCC connect to the Arduino Board +5V
The Sensor GND connect to the Arduino Board GND
The Sensor Trig connect to the Arduino Board Digital I/O 9
The Sensor Echo connect to the Arduino Board Digital I/O 10

Code:
First you have to define the Trig and Echo pins. In this case they are the pins number 9 and 10 on the Arduino Board and they are named trigPin and echoPin. Then you need a Long variable, named “duration” for the travel time that you will get from the sensor and an integer variable for the distance.

In the setup you have to define the trigPin as an output and the echoPin as an Input and also start the serial communication for showing the results on the serial monitor.

If the object is 10 cm away from the sensor, and the speed of the sound is 340 m/s or 0.034 cm/µs the sound wave will need to travel about 294 u seconds. But what you will get from the Echo pin will be double that number because the sound wave needs to travel forward and bounce backward.  So in order to get the distance in cm we need to multiply the received travel time value from the echo pin by 0.034 and divide it by 2.

Source Code: https://create.arduino.cc/editor/mert...

Social Media:
Instagram: mertarduino
Facebook: mertarduino
8 سال پیش در تاریخ 1395/09/06 منتشر شده است.
34,866 بـار بازدید شده
... بیشتر