Making a V-Carve Inlay

Cutting a V-carve inlay for a cutting board. I started out cutting the female inlay using the @amanatool #46200-K 1/8" Spektra™ coated downcut bit and followed up with the #45771-K Spektra™ coated 30° engraving bit. The same progression was then followed on the opposite male portion of the inlay and was then glued into the female pocket.
- - - - - - -
#TeamTOOLSTODAY
- - - - - - -
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Depth per pass: .125"
- - - - - - -
Amana Tool's item no. 46206-K 1/2" Spektra™ coated downcut bit removed the waste material revealing the inlay.
- - - - - - -
RPM: 18,000
Feed Rate: 200ipm
Plunge Rate: 100ipm
Depth per pass: .25"
#short #shorts

Tools Used:

Axiom AR8 2'x4' CNC -
https://www.toolstoday.com/v-14604-ax...
- - - - - - -
Design Software - Vectric V-Carve Pro -
https://www.toolstoday.com/cnc-machin...
- - - - - - -
Amana Tool 46200-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia x 1/2 CH x 1/4 SHK 2 Inch Long Down-Cut Router Bit
https://www.toolstoday.com/v-13777-46...
- - - - - - -
Amana Tool 45771-K Solid Carbide Spektra Extreme Tool Life Coated 30 Degree Engraving 0.005 Tip Width x 1/4 SHK x 2-1/4 Inch Long Signmaking Router Bit
https://www.toolstoday.com/v-14233-45...\
- - - - - - -
Amana Tool 46206-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/2 Dia x 1-1/4 CH x 1/2 SHK 3 Inch Long Down-Cut Router Bit
https://www.toolstoday.com/v-13917-46...

** Subscribe - toolstoday

** Shop the website - http://www.toolstoday.com

** Like at Facebook - http://tinyurl.com/toolstoday-facebook

** Follow on Instagram - Instagram: toolstoday