How to Make a Wavy Flag on an X-Carve CNC Router

In this video, I take you through a How To of making a Wavy American Flag using a 3D model purchased from Etsy. I show you how to import the model into Vcarve, adjust the model dimensions based on the material dimensions and how to apply the Stars and Stripes to the model so that they follow the contours of the waves. I also show how I set the toolpaths and what bits I used. The last half of the video shows me making the actual flag, using walnut and finishing it with walnut colored Danish Oil and Minwax Semi-Gloss Spray Polycrylic.

Total Time: 3 hours machining, 1 hour to sand and apply finish. The Danish Oil sat for 72 hours before applying the top coat.

Total Dimensions: Roughly 24"x13" (not exact measurements, but close). This was made using 26" walnut cutoffs from a previous project.

Below are links to the products I used to the make this flag

Link to Wavy Flag Model:

https://www.etsy.com/listing/67514406...

Link to Stars and Stripes SVG File:
https://etsy.me/2onoqKe

Affiliate Links:

1" Cove Bit
https://amzn.to/2tGCzUU

.25" Ballnose Carbide Ball Nose
https://amzn.to/2sW4oZb

1/8" Whiteside Downcut Bit
https://amzn.to/2QhrAZJ

Amana Tools 60* V-Bit (Spektra Coated)
https://amzn.to/34VYWCG

Dremel Polishing Wheels
https://amzn.to/2MprXAs

Walnut Danish Oil
https://amzn.to/2Mpslio

Minwax Semi-Gloss Polycrylic
https://amzn.to/2QjlNmj

Heavy Duty Keyhole Hangers
https://amzn.to/2shktIS

• #people_blogs
• #wavy_flag
• #cnc
• #x_carve
• #xcarve
• #wavy_american_flag
• #vcarve
• #3d_models
• #3d_flag
• #cnc_router
• #cnc_machine
• #woodworking
• #wood_working
• #wavy_wooden_flag
• #wavy_wood_american_flag
• #wood_american_flag
• #cnc_american_flag
• #how_to_make
• #how_to_make_wavy_flag
• #x_carve_projects
• #xcarve_projects
• #cnc_projects